ICP Testing results.

  • Thread starter Thread starter Sidsreef
  • Start date Start date
  • Tagged users Tagged users None

Sidsreef

Active Member
View Badges
Joined
Dec 3, 2015
Messages
358
Reaction score
367
What state or country do you live in
Texas
Rating - 0%
0   0   0
TEST RESULTS


Hello,

I have a 90-gallon SPS tank that has been running for over two months seeded rock from a 1-year and 6 month system. i dose tropic Marin AFR. i do a water change every 3 weeks at 10% with Tropic Marin pro reef salt

i keep my tank at around
salinity at 1.025 ( i believe that the tank was around 1.023/24 gravity at the time of taking icp sample and since then has been fixed) I'm gonna bump to 1.026
Temp: 77.0-78.0
Alk: 6-12 Dkh
Cal: 400-450
Mag:1380-1450
PH: 8.10-8.30
NO3: 14ppm
PO4: 0.01
trident.jpg






For dosing, i put tropic marin AFR into the tank and that fix's my calcium and alkalinity but my magnesium i have to spot dose because the mag won't rise up in the tank. this might be because my tank may consume more mag and the all-for reef keeps it from moving. I'm not sure tho. i use red sea magnesium powder and mix it with RO/DI.

Macros:
potassium- Deficient
Sodium- Deficient
Chlorine-Deficient
---------------------------------------------------------
should i dose potassium?

as for sodium, i don't think that's a problem because i have increased my salinity since then

Not sure why but chlorine is showing up does anyone know the fix for this? i had the same macro deficiency in my last ICP.
------------------------------------
Trace and minor elements:
Molybdenum-deficient
Nickel-Deficient
Manganese-deficient (Not detected)
Rubidium-deficient
Selenium-elevated
Lithium-Elevated
-----------------------------------------------
I am dosing Tropic Marin AFR twice daily and says it has all of the trace elements in it. i don't doubt it but does this mean my corals are consuming these elements more? follow-up question is what product to use to dose this?

Selenium and lithium are elevated. should i be worried or just leave it?
------------------------------------------------

Contaminants:

Aluminum: elevated it says optimal levels are 0.020 but 0.124. would this be something that is leeching? i got a BRS heater that's titanium and a protein skimmer and some probes for Neptune and an extra PH probe. and that's about it. not sure what to do about this
cesium: elevated( elevated by 0.02) not really worried about this because its right above normal limits into an elevated level
Cadmium: elevated


any help would be great. thanks!
 
as for sodium, i don't think that's a problem because i have increased my salinity since then

Not sure why but chlorine is showing up does anyone know the fix for this? i had the same macro deficiency in my last ICP.
------------------------------------

That would have come up when you increases salinity
 
Does your alkalinity swing that much with the dosing?
no. it stays about 7.25 and 8.25. if it goes up to 12.0 that's the max limit id want it at but to answer your question i make sure my alk doesn't go up or down by 1.0 in a 24-hour period it slowly increases over time. the highest swing up in the last month is about 0.50 in 24 hour period
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 16 18.6%
  • Fish or coral food

    Votes: 5 5.8%
  • Test kits or reagents

    Votes: 8 9.3%
  • Filter media or replacement fleece

    Votes: 5 5.8%
  • RO/DI filters or supplies

    Votes: 14 16.3%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.6%
  • I keep a backup of everything

    Votes: 21 24.4%
  • Other (Post in the comments)

    Votes: 7 8.1%
Back
Top
Home
Post thread…
Market
What's new