In-Home tank stand and canopy

  • Thread starter Thread starter Schgred
  • Start date Start date
  • Tagged users Tagged users None

Schgred

Active Member
View Badges
Joined
Jan 8, 2014
Messages
110
Reaction score
2
Location
Wausau, Wisconsin
Rating - 0%
0   0   0
So I currently have a 37 gallon mixed reef tank. I have been wanting to get a larger tank and run it with a sump so I have been thinking of either a 75 gallon or 90 gallon. My current tank is in my office but I have been planning to move it to my home to the 90 gallon.

We just moved to a different home and in the basement the previous owners had been using a specific area that is over the main water line and the basement sump (which is bone dry, without a sump pump) for some plants. You can see the attached pictures. I don't know why, but it didn't hit me till after we moved in, that this is a perfect set up for a tank! It looks as if someone built it for a tank! Take a look at the pictures.

The space that would fit the tank is 58.5" wide by 22.5" deep by 25.5" tall. If only they made a tank that was 58" wide! So I'm thinking that a 90 gallon should fit perfectly in this spot. I will end up doing some modifications to the area to reinforce it but I wanted to put these pictures up to hear your thoughts. The bottom of the tank will be 42.5" off the ground, so it will be a bit higher and will be more work for me to get my hands into, but with modifying the top of the cabinet space I should be able to make it perfect for the lights.

Two questions that I am wondering about have to do with the electricity. There is an outlet in the top canopy space. While that is incredibly convenient, is that too much moisture for an outlet to be around? The same goes with the outlet that is on the back wall, behind where the tank is. It would be nice to have an outlet underneath the tank, but the concern is the same for underneath.

Any thoughts on how to use this space/modify it would be very helpful.

photo 3.jpg
photo 4.jpg
photo.jpg
photo2.jpg
 
You can use outdoor covers on those outlets to seal them from any potential moisture. Home improvement stores carry them.
 
Do you think that those covers will be sufficient for the humidity that will be up in the canopy? I thought maybe GFCI outlets should be put in there, but if the moisture and humidity is so significant, I can't afford for the GFCI to be constantly tripping.

I guess people put surge protectors and outlets in the sump area so I can't imagine the moisture would be a huge issue would it?
 
I don't think so, unless it's completely air tight. In that case, you'll need to get some ventilation in there somehow. Holes, fans, etc.
 

TOP 10 Trending Threads

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 12 18.2%
  • Powerheads or wavemakers

    Votes: 5 7.6%
  • Sump or rear filtration chambers

    Votes: 9 13.6%
  • Skimmer or other filtration equipment

    Votes: 9 13.6%
  • Overflow or plumbing

    Votes: 12 18.2%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 18 27.3%
  • Other—tell us what I missed

    Votes: 1 1.5%
Back
Top
Home
Post thread…
Market
What's new