Initiating an Apex Feed Mode

[drblank1]

I have manual switches tied to a breakout box. I know how to create a feed mode using one of those. But it would be cleaner to initial one of the built in feed mode (A-D) when I flip the switch. Is there a way to initiate Feed Mode using a command if I flip a switch?

 

[vetteguy53081]

I have manual switches tied to a breakout box. I know how to create a feed mode using one of those. But it would be cleaner to initial one of the built in feed mode (A-D) when I flip the switch. Is there a way to initiate Feed Mode using a command if I flip a switch?

@SuncrestReef

 

[SuncrestReef]

The built in FeedA - FeedD timers can only be initiated manually by clicking them on your dashboard. They cannot be triggered programmatically. Read my tutorial on Apex Feed Cycles for a method of simulating it with a virtual output as a timer:
https://www.reef2reef.com/ams/neptune-apex-programming-tutorials-part-7-feed-cycles.715/

 

[drblank1]

Thx for the info. I will setup a manual feed mode with virtual output.