Jebao TW series

[eb_reef]

I am looking for a cheap wave pump that I can add to my apex. I found this Jebao adapter https://www.amazon.com/Neptune-Systems-Controller-Linkage-Adapter/dp/B0149K2ZUE/ref=sr_1_fkmr0_1 and my LFS has Jebao TW series but I cannot find any details about the TW series Jebaos.

Amazon shows "Connect Apex to Jebao DC Pump (All Series) (Not for DCT Series)" but what is DCT Series? Should I just order a Jebao RW online?

 

[ronl]

TW series looks like the original WP series wave pumps. But Jebao has several other newer series of wave pumps.

DCT is one of Jebao’s DC return pumps.

 

[cmcoker]

Some of the newer series have the control module moved off the pump and into the controller if that makes sense.
So you can not bypass the controller it comes with and use a 3rd party controller.

For instance, on my rw 8, I snipped the control and ground lines in the controller and spliced in a data cable that connects to my profilux. The control signal is sent down to the pump from the profilux, power is provided by the controller and it works fine. Doing this on the DCT series, it would not work because you have bypassed the control module in the controller.

I think the sw series has a port built in for apex control. I am unsure if the TW or OW have the control at the pump or in the controller. DC and DCT are their return pump series, but the apex adapter should work on the RW, PP, and WP series

 

[eb_reef]

I see now. I am able to find a lot more information about SW and RW series. I was also able to find a video of someone creating a DIY cable to the SW series controller.