Kamoer FX-STP2

[nly04]

Anyone is using the Kamoer fx-stp2 with wifi, do you how to factory reset so it does not stuck at wifi mode? Also do you know how to calibrate it?
I did a quick measure using my timer and container, I got 70ml while setting at 60ml. It stuck at wifi mode and I cannot do much of adjusting. I need to get out of wifi since the app is suck and it asking me for my wifi password to set up which I feel shady here especially it from China.

I saw the video on youtube for calibrate but it older version and my does not look like that.

 

[vetteguy53081]

I have one but not home
I’d imagine there is an answer on you tube

 

[Pny]

What does the top line of the built in screen say? Mine goes from "Wifi Control" to "Work Mode" about 30 seconds after I turn off the app.

In "Work mode I can adjust the current flow setting with the knob and if I press the knob for a few seconds it turns the flow off, and if I turn the knob while in this off-state I get to the menu. (The menu can be used to reach settings and do calibration).

Yes its from China, but I don't think its shady since the app must send the wifi to the unit so the dosing unit itself it can connect to your wifi.

 

[nly04]

I was able to get it out of wifi mode. Now I need to calibrate it. But I can’t figure out how to do it. Here is a calibrate screen.

 

[Pny]

My calibration meny doesnt look as in the manual but here is how I calibrate: Select an rpm close to what you are going to use on the middle line. Hold the output hose over an accurate measurement container, press the knob and it will run for 60 seconds. Input the actual volume in ml/min on the last line and you are ready!

 

[nly04]

My calibration meny doesnt look as in the manual but here is how I calibrate: Select an rpm close to what you are going to use on the middle line. Hold the output hose over an accurate measurement container, press the knob and it will run for 60 seconds. Input the actual volume in ml/min on the last line and you are ready!

That's simple. I will try that, Thank you very much.