Kamoer STP - Doser Users How Much ML/Min You dosing?

[Asonitez]

I got

ReefOCTOPUS CalReact 200
Bubble Magus Second Chamber
ARM Extra Coarse Media (main reactor)
REBORN media (bubble magus second chamber)
Carbon Doser Regulator @ 3.5psi


Kamoer STP Doser
1 bubble every 4/seconds
Pull Configuration

Trying to maintain 8.0-8.5 dkh
Currently dosing 60ml/min

*Note: Co2 recirculating is turned off on my reactor. I can’t stop the reactor from sounding like a skimmer otherwise.



It would be helpful to answer the following

Calcium Reactor Model
Second Chamber?
Media Being Used
Regulator and BPM
Push or Pull Configuration
Target DkH and Target PH in calcium reactor.

Did anyone have to re-grease anything upon receipt?

 

[Asonitez]

No one ? I guess it’s what I get for being an early adopter.

 

[LouieP]

what are you asking?

 

[Asonitez]

Well I’m hoping to see how much ml you dosing, what reactor your using and media, what size tank, what ph your running in your reactor, are you pushing or pulling, what regulator and how many bpm approx.

I’m running 60ml at ph of 6.7 1 bubble every 4 seconds.

Did you need to grease or re-regrease anything upon receipt or before use.

I’m trying to gauge if my issue of keeping alk at 8.5 is because low ml/min - low bubble count or insufficient ph.

Ppl are using this thing on 3/400g Aquariums but I’m struggling to maintain my alk. Just making sure I’m doing it right.

 

[LouieP]

I run a georeef 510, maxjet feed pump my effluent is wide open w no restrictions, 7.0-7.1 ph, tropic eden median, & carbondoser regulator @ 5bmp.
I plan on getting a kamoer doser.

 

[LouieP]

@Asonitez how are you running your Kamoer?

I finally got mine Kamoer, I have mine set at 10 sec per bubble, 7PSI, 55ml/min & 6.88ph

 

[Asonitez]

Hey Louie I’m running 65ml 3.5bpm and oh around 6.5 the pressure gauge is around 3.5psi. It’s running stably took some fiddling but I like it a lot. I’m Pulling through the reactor.

 

[LouieP]

I currently have mine before my CaRx.