Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
I’ll probably just go to clear stuff since you’ve already tried it and it works for youMine wasn’t clear either and the Amazon stuff has worked great.
that would work too.
I have my router split I thought I would have problems but I don’t is actually pretty easy to connect at least for meI am sure I would love this pump but dang hard to connect it to my network. Even on my 2.4ghz network it won't connect because of my long password so I gave up :-(
For future reference, tube length from brand new unit is 770 mm.
For future reference, tube length from brand new unit is 770 mm.
I tried the tubing referenced below and it cracked after 2 days. I used pletty of grease. The replacement tubing doesn't feel as sturdy as the original and is more opaque. Any suggestions for tubing?
INTLLAB 3mm ID x 5mm OD Peristaltic Pump Flexible Hose Silicone Tubing Food Grade Tube 3 Meter
Not sure about aftermarket but Coralvue has tubing and replacement heads(I was told by a Coralvue rep that these work with the pro t):
Kamoer X1/X4 Dosing Pump Tubing
Included tubing for the Kamoer Liquid Dosing pumpsClear PVC Tubing for the use with any Kamoer* dosing pump.Sold in 1ft sectionsIMPORTANT: Not compatible with FX-STP Unitswww.coralvue.com
Kamoer F4 Pro & X1 Pro Pump Replacement Heads
Colored replacement heads for the Kamoer F4 Pro and X1 Pro Dosing Pumpwww.coralvue.com
@Saltyanimals What tubing are you using?Agree on using manufacture recommended if OEM is not available. We use so little of these tubes that it doesn't make sense to try and save $$$ at the risk of something going wrong or less life out of the replacement.
I'm approaching 6 months (~4400 hours) on my last tube replacement without any issues on my pump and Alk levels are rock solid so far so good. I tuned my ml/min down and increase effluent strength to reduce the wear and tear on the pump and reduce how often I need to replace tubes. This had another benefit as it raised my tank pH a bit because I was injecting less low pH effluent.
I may set an internal 9 month tube replacement as a standard instead of waiting for failure.
Just looked up my order from Aliexpress. Using Pharmed BPT as recommended by several folks on this forum. Shows 1k hour tube life, but I'm 4x that already. I think this figure largely depends on how hard you drive the pump. I'm only doing 22 ml/min at 70 rpm for reference.@Saltyanimals What tubing are you using?
Turns out this isn't the correct dosing pump head tubing, but instead tubing to run to the tank or container. Instead, Coralvue says to order this tubing:Not sure about aftermarket but Coralvue has tubing and replacement heads(I was told by a Coralvue rep that these work with the pro t):
Kamoer X1/X4 Dosing Pump Tubing
Included tubing for the Kamoer Liquid Dosing pumpsClear PVC Tubing for the use with any Kamoer* dosing pump.Sold in 1ft sectionsIMPORTANT: Not compatible with FX-STP Unitswww.coralvue.com
Kamoer F4 Pro & X1 Pro Pump Replacement Heads
Colored replacement heads for the Kamoer F4 Pro and X1 Pro Dosing Pumpwww.coralvue.com