Kessil A360X Tuna Sun 6400K Settings

  • Thread starter Thread starter Ken S
  • Start date Start date
  • Tagged users Tagged users None

Ken S

Active Member
View Badges
Joined
Sep 7, 2024
Messages
179
Reaction score
91
Location
St. Louis
Rating - 0%
0   0   0
Would anyone know the settings for a Kessil A360X Tuna Sun to put out 6400K spectrum? I'm using a wifi dongle, no spectral controller.
 
The spectrum range on the Tuna Sun is 6000k-9000k. If you have the wifi dongle, you can use the app for the light. If memory serves me right, if you turn the 'color' knob all the way to the left it should be at 6000k. You can tell by how the light looks.
 
The spectrum range on the Tuna Sun is 6000k-9000k. If you have the wifi dongle, you can use the app for the light. If memory serves me right, if you turn the 'color' knob all the way to the left it should be at 6000k. You can tell by how the light looks.
Thank you! There are also settings for AM (which I think is amber) and R that toggle left to right. Would you happen to know those settings? Trying to hit right around 6400-6500K spectrum. Thanks
 
You are correct, it adds more red and amber separately to the light sir.
 
You are correct, it adds more red and amber separately to the light sir.
Understood! 😂 Does adding amber or red change the spectrum? Sorry if this is a dumb question!

What im trying to do is set a spotlight at a Magnifica anemone in my tank. I've been researching & it seems 6400K is their preferred spectrum. I currently have 3 xr15 & 2 Kessil A360X Blue hanging from a light rail over a mixed reef. I set the XR15's to 6400K but it's just too white/yellow, my corals hate it. I bought a cheap 6400K freshwater led off Amazon & pointed it directly at the Nem, and I can tell it likes it a lot, but it's not a very powerful light. So I bought a Tuna Sun from a guy selling one here on R2R thinking it would like a bit more intensity. I also bought a narrow reflector-35 to keep the light spread only hitting the nem (hopefully). The Nem is larger than the light spread of the cheapo 6400K light I currently have.

This is my second Magnifica Nem. I had one many, many years ago & I had it many, many years. Back in the days of metal halides & vho actinics that ran so hot I had to buy a chiller that ran so hot it kept my air conditioner running 24/7 in a never ending battle with the chiller motor 😂 I'm thankful for how far the new equipment has come in the years I've been out of the hobby! Looking at an old pic of my previous tank, the Nem looks great, it was absolutely huge, but the corals look like crap! And the lights look more on the white side. I thought I used 10K mh bulbs if I remember correctly, but also did not change them yearly as recommended due to financial constraints.

Anyway, just trying to see if I can have the best of both worlds. Maybe it's a dumb idea altogether 🤷🏻

Here is a pic of the tank I set up close to 37 years ago & a short video of my current Magnifica.
 

Attachments

  • Screenshot_20250620_220252_Gallery.jpg
    Screenshot_20250620_220252_Gallery.jpg
    122.9 KB · Views: 84
  • Screen_Recording_20250622_091249_Gallery.mp4
    22.3 MB
Would anyone know the settings for a Kessil A360X Tuna Sun to put out 6400K spectrum? I'm using a wifi dongle, no spectral controller.
Well a few basics first ..
6500k LEDs are rarely what one would call very daylight accurate as say 6500k from the sun. At least in normal commercial products.
And kelvin temp numbers being derived from averaging many nm of " color" the spectrum can have all sorts of ratios giving " 6500k" all sorts if things.
Yellow looking 6500k, pinkish 6500k ect

You can look up cct or correlated color temp for a more in depth treatment.

Now on to kessil.
Yep 6000-9000 is their stated range.
Looks like this:
1000002826.png


What real 6500k looks like .


Details mere details. There are leds that come close to that spectrum and some one can fill in the missing bits
Cyan filling is generally the harder one to get short of diy.
With your kessil i'd probably add some of the red/ amber ( guess you can't though?) even somewhat at the expense of k temp.
At 50% color you could guesstimate the k as 7500k.

This is a generic 8000k led with some red added to bring it to 6500k- ish
Cri is estimated to be about 94.
Cri of 100 is " exactly" like the sun at 6500k.
Most generic 6500k white you would be lucky to hit about 80 cri
Which is why most fw lights add red,/ blue to compliment the poor quality white LEDs.
As you can see the tone is pinkish and cyan gap is not filled in ( trust me ). Cri isn't currently a very good metric for LEDs but it will do.
1000002828.png

Ok full disclosure .
1000002829.png


Which FW light did you use?
There are plenty of strong ones if you identify the type

Ai prime fw is at least 50 watts.
 
Last edited:
Well a few basics first ..
6500k LEDs are rarely what one would call very daylight accurate as say 6500k from the sun. At least in normal commercial products.
And kelvin temp numbers being derived from averaging many nm of " color" the spectrum can have all sorts of ratios giving " 6500k" all sorts if things.
Yellow looking 6500k, pinkish 6500k ect

You can look up cct or correlated color temp for a more in depth treatment.

Now on to kessil.
Yep 6000-9000 is their stated range.
Looks like this:
1000002826.png


What real 6500k looks like .


Details mere details. There are leds that come close to that spectrum and some one can fill in the missing bits
Cyan filling is generally the harder one to get short of diy.
With your kessil i'd probably add some of the red/ amber ( guess you can't though?) even somewhat at the expense of k temp.
At 50% color you could guesstimate the k as 7500k.

This is a generic 8000k led with some red added to bring it to 6500k- ish
Cri is estimated to be about 94.
Cri of 100 is " exactly" like the sun at 6500k.
Most generic 6500k white you would be lucky to hit about 80 cri
Which is why most fw lights add red,/ blue to compliment the poor quality white LEDs.
As you can see the tone is pinkish and cyan gap is not filled in ( trust me ). Cri isn't currently a very good metric for LEDs but it will do.
1000002828.png

Ok full disclosure .
1000002829.png


Which FW light did you use?
There are plenty of strong ones if you identify the type

Ai prime fw is at least 50 watts.

Thank you for this info!

Here is a link to the cheap FW led I bought from Amazon https://a.co/d/6JkPM2l that is currently on the tank.

I recently bought a used Kessil A360X Tuna Sun from a R2R user here and was looking for settings to get as close to 6400K that I can with it.
 
Thank you for this info!

Here is a link to the cheap FW led I bought from Amazon https://a.co/d/6JkPM2l that is currently on the tank.

I recently bought a used Kessil A360X Tuna Sun from a R2R us
1000002842.png
er here and was looking for settings to get as close to 6400K that I can with it.
The Lominie's listed as 18 watts.
No ratios but supposedly RGB and some violet/ uv diodes.

Also lists high cri of 90+

Kessil notoriously lists very little real data on their lights.

As I said just turn the color knob. I don't know which direction is 6000-9000k.
I'd go past 6500 k if
one has access to the additional colors.
I'd use the red to improve the CRI.

1000002842.png
 
8e87dc70-f7e3-4040-9183-7fd8cb4149ee.jpg

The Tuna Sun is installed & I can tell already the Mag loves it. It's set to 20% for 4 hrs right at midday with the XR15's & Tuna Blues. I'll slowly increase it over the coming weeks. I have a 35 degree reflector on it & it's about 12" above the surface. I angled & set it so little to no white light spread from it goes beyond the Nem itself. It's reaching & trying to grab all of it.

The cheapo Lomonie light was just temporary to see if it liked the spectrum, but even on full blast it wasn't that bright. The spread didn't even hit the whole nem at 8" above the surface.

The Nem's tentacles have swollen up, especially right where they go into the base. It now looks much more like the Mag I had 25 years ago under 400w MH/VHO Actinic bulbs.
 
Would anyone know the settings for a Kessil A360X Tuna Sun to put out 6400K spectrum? I'm using a wifi dongle, no spectral controller.
How is you experience with the wifi dongle?
I have 4, one on each of my A360XE Tuna Blues, one on A360X Tuna Sun, one on A360X Refugium. Aside from having to do a "quick reload" each time I want to access a different dongle, no issues at all. They are 2.4ghz so I think people that have problems connecting are using "Smart Connect" rule on their router. If you can, turn that off so the bands are split/separate, connect it to 2.4 then go back to using the smart connect rule. Myself, I leave it off. I like to be able to connect all of my devices to the proper band myself instead of having the router do it for me.
 
Hello I’ve just come across your thread as I have been looking into spectrum for these nems as I want one for myself. Just wondering if you had any updates of how it’s going and if you still have the kessil over it? Thankyou
 
I do! You can see the yellowish hue around the nem from the Tuna Sun. Seems to like it!
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.5%
  • I decorate AROUND the tank or stand

    Votes: 4 18.2%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 13 59.1%
  • We don’t decorate for the holidays

    Votes: 4 18.2%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new