KH director - adaptive control

[kilnakorr]

For some unknown reason, my adaptive control has stopped working.
I used to see the 'calculated dosage' change, but seems to just read '0' no matter if the measured value is above or below the target.

Anyone can shed some light on this?

 

[Gaël]

Hello,

I see alarm notifications at the top.
If you have activated Deactivate control on alarm in the KHD alarm settings and there is an alarm for an out-of-range KHD value, it is normal for automatic adjustment to be deactivated.

Gaël

 

[kilnakorr]

Hello,

I see alarm notifications at the top.
If you have activated Deactivate control on alarm in the KHD alarm settings and there is an alarm for an out-of-range KHD value, it is normal for automatic adjustment to be deactivated.

Gaël

The alarm was not related to the KH.
I got it fixed by setting add on control instead, and after one test and seeing it adjusted I switched back to adaptive control, and it works fine now.
Not sure what was wrong honestly, but seems to work as intended again.
Maybe any alarm, will impact it and I just haven't noticed before.