Leaking threaded joint

  • Thread starter Thread starter Phantom7
  • Start date Start date
  • Tagged users Tagged users None

Phantom7

Active Member
View Badges
Joined
Feb 15, 2021
Messages
135
Reaction score
37
Location
32174
What state or country do you live in
Florida
Rating - 0%
0   0   0
Hello! I have a hose barb threaded into a 3/4” pvc fitting, and no matter how many times I’ve taken it apart, used Teflon tape, etc, it keeps leaking! I’ve managed to get it down to what seems like a drop every 20-30 minutes, but that’s still leaking, lol. I’m at a loss as to what to do, as I don’t deal with threaded stuff too much, and usually cement everything together with slips.
Ironically, whenever I tried the slip stuff on this aquarium it leaked in the same spot (it’s cursed!) but that has been cut away and replaced with the hose barbs now.

i need advice on how to remedy my nightmare. I’ve read to use a specific sealant but don’t want to spend $30 to use it on one thread (especially if it dries up)
Thank you!
 
Use this with no tape. Hand tighten and then a quarter turn with channel locks pliers your done
48772699-4002-4BCA-8ADF-CA372DEA2700.png
 
Use this with no tape. Hand tighten and then a quarter turn with channel locks pliers your done
48772699-4002-4BCA-8ADF-CA372DEA2700.png
Does it need to be stored like PVC Cement? (Does it dry out?)
 
1 drop per every 20-30 minutes would tempt me to stick a towel under it and see whether salt creep ‘magically’ plugs it within a week or two. ;)
 
1 drop per every 20-30 minutes would tempt me to stick a towel under it and see whether salt creep ‘magically’ plugs it within a week or two. ;)
Honestly over night it has more or less stopped leaking. when I woke up I stuck the edge of a paper towel in the little gap and very little water was in it. Just keeping this thread for if it starts again and for the future.
Salt creep is magical, just makes me slightly uncomfortable relying on that with my 3500 gph return pump on the other end lol.
 

TOP 10 Trending Threads

WHAT MOST EARNS A REEFING BUSINESS YOUR "BEST OF THE BEST" NOMINATION?

  • Excellent livestock or product quality

    Votes: 4 18.2%
  • Honest listings and accurate expectations

    Votes: 2 9.1%
  • Helpful, knowledgeable customer service

    Votes: 1 4.5%
  • Standing behind a product when something goes wrong

    Votes: 6 27.3%
  • Fair prices and good value

    Votes: 4 18.2%
  • A unique selection or innovative products

    Votes: 0 0.0%
  • Supporting the reefing community or sustainability

    Votes: 0 0.0%
  • Consistent quality over time

    Votes: 4 18.2%
  • Other (Post in the comments)

    Votes: 1 4.5%
Back
Top
Home
Post thread…
Market
What's new