Let's talk PH and sps

RedneckReefer68

Well-Known Member
View Badges
Joined
Feb 13, 2015
Messages
637
Reaction score
233
Location
United States
Rating - 0%
0   0   0
How low is to low and how big of a swing is acceptable? My tank runs from 7.4 at night to 7.9 of a high during the day. What's every one else's?
 
I noticed problems when mine got below 7.6 the only solution was a co2 scrubber. After moving I no longer had the low ph problem. Most people seem to think between 7.8 and 8.4 is an acceptable range. With sps The more stability the better so any swing would be less than ideal but I'd say a swing of less than .4 would be good to shoot for.

Are you having problems with your SPS?
 
I use the apex ph probe. My ph fluctuates from 8.8 to 8.6 daily. Obviously the numbers aren't right, but the fluctuations are.
 
How low is to low and how big of a swing is acceptable? My tank runs from 7.4 at night to 7.9 of a high during the day. What's every one else's?
Whaaaattt? Is it just me or theres noway this is right, araganite melts below 7.5 , and theres noway unless your adding c02 constantly to your tank, the probe has to be off if youe not running problems , mine swings from 8.2 to 8.4 and this is without use of kalk or reverse photo period
 
.5 swings daily arent going to effect anything because the animals internal ph adapts to the medium between swings, i would try keeping a window open or run an airline to your skimmer. If you dont see a change try to recalibrate
 
Whaaaattt? Is it just me or theres noway this is right, araganite melts below 7.5 , and theres noway unless your adding c02 constantly to your tank, the probe has to be off if youe not running problems , mine swings from 8.2 to 8.4 and this is without use of kalk or reverse photo period
Yep my bad, I typed that wrong..I meant to say 7.94 to about 7.98 during the day
 
Mine goes from 7.97 to 8.24 depending on how cold my wife is:D
 

TOP 10 Trending Threads

IF YOU HAD TO OPERATE EVERYTHING ELSE MANUALLY, WHICH AUTOMATED SYSTEM WOULD YOU KEEP?

  • Auto top-off

    Votes: 18 60.0%
  • Automated dosing

    Votes: 1 3.3%
  • Mechanical filtration / roller filter

    Votes: 2 6.7%
  • Automated water testing

    Votes: 0 0.0%
  • Automatic feeding

    Votes: 0 0.0%
  • Lighting schedule

    Votes: 5 16.7%
  • Controller and remote monitoring

    Votes: 2 6.7%
  • Leak detection and emergency shutoff

    Votes: 1 3.3%
  • Automatic water changes

    Votes: 0 0.0%
  • None. I prefer to operate everything manually

    Votes: 0 0.0%
  • Something else (explain in the comments)

    Votes: 1 3.3%
Back
Top
Home
Post thread…
Market
What's new