I've connected two optical level sensors via a splitter to my profilux 4 but they dont appear to be working, I followed the instruction video here (141) ProfiLux 4: Using GHL Doser for AWC control - YouTube however neither the ATO or AWC function respond to changes in water level.
I've tried switching the sensors around at both the input and tank end and makes no difference, I've tried switching from the purple to green input (and switching the sensor to 3 and 4) and tried without using the splitter (sensor set to 1 and 3), none of it seems to work. I dont know how to test if the sensors are even producing a signal which would at least help identify the issue. Also it now appears the profilux has gotten a little confused and 3 sensor ports are now shown in Control > Level > Sensors
regardless of how I connect them, in fact all four show as connected if nothing is connected.
Advice appreciated
I've tried switching the sensors around at both the input and tank end and makes no difference, I've tried switching from the purple to green input (and switching the sensor to 3 and 4) and tried without using the splitter (sensor set to 1 and 3), none of it seems to work. I dont know how to test if the sensors are even producing a signal which would at least help identify the issue. Also it now appears the profilux has gotten a little confused and 3 sensor ports are now shown in Control > Level > Sensors
regardless of how I connect them, in fact all four show as connected if nothing is connected.
Advice appreciated