Magnesium test??

  • Thread starter Thread starter JAWSIII
  • Start date Start date
  • Tagged users Tagged users None

JAWSIII

Active Member
View Badges
Joined
Aug 2, 2020
Messages
136
Reaction score
38
Location
METAIRIE
What state or country do you live in
Louisiana
Rating - 0%
0   0   0
Hi , I am using salifert test for mag, cal, dkh and phosphate. When doing my latest round of tests I noticed something on the Mag sheet that stated “calcium levels between 300-500ppm should not interfere with results”. My calcium tests at 540ppm. My mag has been testing off the chart 1500 plus. I even used a second syringe full and calculated that the mag was at 1600. My LFS API aqua spin test showed the mag was at 1280. I’m not so concerned with the actual number but more is the higher calcium skued the mag reading.

is there any way to “subtract” a value off of the mag reading if the calcium is above 500 ? Or is this not really a concern? I fell like mag at anyone of those levels is ok. I just wanna keep it stable and use a baseline number.
Thanks.
 
Safe CA level is about 440
I would suggest both an ICP test and taking a water sample to a trusted LFS that does not use api test and see what results they come up with and to compare with other two and you will then know what you actually have
 
I do not think there's a concern that a calcium level of 540 ppm is causing magnesium to read much higher than it really is. Simple subtraction is not appropriate.
 
your calcium should generally be in the 400-460 range. With calcium of 540, depending on what your alkalinity is your magnesium test is most likely correct. What is your alkalinity at currently? = kali
 
Currently all is at 9.5
 
Hi , I am using salifert test for mag, cal, dkh and phosphate. When doing my latest round of tests I noticed something on the Mag sheet that stated “calcium levels between 300-500ppm should not interfere with results”. My calcium tests at 540ppm. My mag has been testing off the chart 1500 plus. I even used a second syringe full and calculated that the mag was at 1600. My LFS API aqua spin test showed the mag was at 1280. I’m not so concerned with the actual number but more is the higher calcium skued the mag reading.

is there any way to “subtract” a value off of the mag reading if the calcium is above 500 ? Or is this not really a concern? I fell like mag at anyone of those levels is ok. I just wanna keep it stable and use a baseline number.
Thanks.
I would first check your tests with a reference liquid, because the magnesium and calcium test can deviate up to 100 units
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 18 18.6%
  • Fish or coral food

    Votes: 5 5.2%
  • Test kits or reagents

    Votes: 10 10.3%
  • Filter media or replacement fleece

    Votes: 5 5.2%
  • RO/DI filters or supplies

    Votes: 15 15.5%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 12 12.4%
  • I keep a backup of everything

    Votes: 25 25.8%
  • Other (Post in the comments)

    Votes: 7 7.2%
Back
Top
Home
Post thread…
Market
What's new