Maxspect jump DC pump error code

[MSP]

Hi Guys,

I have a Maxspect MJ-DC6K im currently setting up on a Waterbox (new Build) and i am getting an Err 7 code when powering up.
Cannot find error codes in the manual or in the Box, and searching online is coming up blank. Any ideas what this is ?

Thanks in advance.

 

[Peace River]

I'm sure that is frustrating. I didn't see anything online either. Hopefully someone here will know about the Maxspect pump error codes, but if not you may need to submit a ticket on the Maxspect website. Good luck!

 

[MSP]

Thanks for reply.

I did contact Maxspect and they replied

For anyone that might get this error as i could find nothing to help online or in the manual,

I had Err 7 no flashing just constant and after a min or so the pump would try to spin again but same error, so I removed the casing to find the propeller was not spinning.
It turned out from investigating that there's a plate under the propeller that should slide up and down the shaft Freely but had become sticky. With no casing it would work, but as soon as the casing was on it would become stuck and not allow the propeller to spin.
I gave it a good soak and scrub until the plate would slide with no resistance and all is now well.

 

[Peace River]

That's great news - I glad to here that your pump is now working! Also, thank you for sharing this information - there's a good chance it will be helpful to someone in the future.

 

[nirshalom]

hay,
I have 3 of those Pumps, maxspect Jump Pump, Return Pump 10K. two of them are working as retuns, and a thired for Uv, Refugy. the socend return used as a subtitute and as a low voltege conected to a battery to hold long in a power breake.
I Had the same Problem, err 7.
when the cover removed the pump is working but once i put the covver on, it makes noise of stack and err 7.
I Send it to a fix under warrente. few dayes ofther the second one with the some problem !.
the pumps are 4 monts old and looks great and clean and yet i tried scubing and cleaning as offered here but the Probleme not resolved.
even if i would find a soultion for this Problem, it looks like those pumps are unrelable.
can somene can give his conclusons or offers i will be happy.

 

[nirshalom]

hay,
I have 3 of those Pumps, maxspect Jump Pump, Return Pump 10K. two of them are working as retuns, and a thired for Uv, Refugy. the socend return used as a subtitute and as a low voltege conected to a battery to hold long in a power breake.
I Had the same Problem, err 7.
when the cover removed the pump is working but once i put the covver on, it makes noise of stack and err 7.
I Send it to a fix under warrente. few dayes ofther the second one with the some problem !.
the pumps are 4 monts old and looks great and clean and yet i tried scubing and cleaning as offered here but the Probleme not resolved.
even if i would find a soultion for this Problem, it looks like those pumps are unrelable.
can somene can give his conclusons or offers i will be happy.