- Joined
- Apr 11, 2018
- Messages
- 10,206
- Reaction score
- 39,477
- Location
- Hurricane, WV
- What state or country do you live in
- West Virginia
I have always used a swing arm hydrometer. 1 single hydrometer I bought a long time ago.
I would like to have some way to check it.
I set up a 75 gallon tank Sunday. No water was added to or removed from the tank, no ATO or skimmate produced. Went to install the ATO yesterday
I tested the SG to add water for evaporation and it was 1 full point lower. Scared me. 1.024
So I either had an error when I mixed the water Sunday or yesterday.
I have 2 swing arm hydrometers and they agreed yesterday. So the problem had to be Sunday.
Not sure how a swing arm hydrometer could read too low though. Bubbles dragged the arm down?
Is the
Milwaukee MA887 Digital Salinity Refractometer with Automatic Temperature Compensation
the answer I seek.
I would like to have some way to check it.
I set up a 75 gallon tank Sunday. No water was added to or removed from the tank, no ATO or skimmate produced. Went to install the ATO yesterday
I tested the SG to add water for evaporation and it was 1 full point lower. Scared me. 1.024
So I either had an error when I mixed the water Sunday or yesterday.
I have 2 swing arm hydrometers and they agreed yesterday. So the problem had to be Sunday.
Not sure how a swing arm hydrometer could read too low though. Bubbles dragged the arm down?
Is the
Milwaukee MA887 Digital Salinity Refractometer with Automatic Temperature Compensation
the answer I seek.
Last edited:
