Mike's Innovative Marine Nuvo EXT 100

Ahogue21

Active Member
View Badges
Joined
Oct 30, 2016
Messages
330
Reaction score
171
Rating - 0%
0   0   0
Correct or a hair under and i mean you could but i never did on my int you need to change a bulkhead or somthing then you have to trash that entire piece
 

shoelaceike

Valuable Member
View Badges
Joined
Jul 1, 2015
Messages
2,260
Reaction score
1,063
Rating - 0%
0   0   0
Correct or a hair under and i mean you could but i never did on my int you need to change a bulkhead or somthing then you have to trash that entire
Correct or a hair under and i mean you could but i never did on my int you need to change a bulkhead or somthing then you have to trash that entire piece
Ya thanks...its only a piece of PVC so it shouldn't be that difficult
 

shoelaceike

Valuable Member
View Badges
Joined
Jul 1, 2015
Messages
2,260
Reaction score
1,063
Rating - 0%
0   0   0
Hey Mike, I got one more question on this...I need the exact dimensions of the stand. They have it listed as 47.5x23.5...is that correct? Thank you so much!
 
OP
OP
Mike Kearns

Mike Kearns

Active Member
View Badges
Joined
Apr 4, 2019
Messages
252
Reaction score
370
Rating - 0%
0   0   0
Where do you store your dosing pumps?
On top of my ato reservoir.
53D1927F-0468-4776-B221-C8709E1A1BDB.jpeg
 
OP
OP
Mike Kearns

Mike Kearns

Active Member
View Badges
Joined
Apr 4, 2019
Messages
252
Reaction score
370
Rating - 0%
0   0   0
New addition to the tank last night. Been in QT for 3 weeks. Added him after lights out. Tang has been swimming near him this morning but no other aggression so far.
90B7BE92-7876-4C3A-8D25-770172886925.jpeg
 
OP
OP
Mike Kearns

Mike Kearns

Active Member
View Badges
Joined
Apr 4, 2019
Messages
252
Reaction score
370
Rating - 0%
0   0   0
A few more things I picked up during the sale. Have one more order coming and then I am going to redo the controller cabinet.

5D013693-8BAA-4293-B88E-00A14C103372.jpeg
 
Last edited:

OlafsReef

Community Member
View Badges
Joined
Sep 17, 2020
Messages
98
Reaction score
122
Location
Seattle
Rating - 0%
0   0   0
Looking great and has been helpful for my build. What did you end up doing to seal the bottom of the inside of the stand? I've never had a stand with a gap around the stand flooring that can allow water under the tank. Any ideas?
 
OP
OP
Mike Kearns

Mike Kearns

Active Member
View Badges
Joined
Apr 4, 2019
Messages
252
Reaction score
370
Rating - 0%
0   0   0
Looking great and has been helpful for my build. What did you end up doing to seal the bottom of the inside of the stand? I've never had a stand with a gap around the stand flooring that can allow water under the tank. Any ideas?
Thanks. I originally was going to just use black silicone around the bottom of the sump area, but never did. Living on the lazy edge here. I do have leak detectors, and just got the Neptune ones.
 
OP
OP
Mike Kearns

Mike Kearns

Active Member
View Badges
Joined
Apr 4, 2019
Messages
252
Reaction score
370
Rating - 0%
0   0   0
One last big order of new stuff. I decided to upgrade my skimmer. I was just tired of all the micro bubbles from the Simplicity skimmer. It skimmed great but no matter how I adjusted it there were always micro bubbles in the display and with having a trident I was worried about it sucking them up a messing with the tests. I am loving the reef octopus so far. No bubbles!
CAD4CF81-63E9-4705-AA3A-162C2BF46385.jpeg

8B004559-2E3F-4CF5-8728-A87951CAD4E5.jpeg
 
OP
OP
Mike Kearns

Mike Kearns

Active Member
View Badges
Joined
Apr 4, 2019
Messages
252
Reaction score
370
Rating - 0%
0   0   0
Working on a new controller board. It is going in a cabinet next to my tank that had dvd/Blu-ray discs in it. I acquired it in the trade with the wife, but did not do anything with it until now.
8301D4FF-2D05-4189-B451-5A85345DD122.jpeg

Lower left corner is for the trident. Skimmer and ato controller won’t reach the cabinet and the heater controller will require short extension cords for the heaters. Not sure if I even want to bother with the mp 40 controllers because they can’t be unplugged from the motors department they don’t do anything with Mobius running. The 2 glass jars will become 3. One for alk one for cal and one waste for the trident. Looking for input or ideas.
 

OlafsReef

Community Member
View Badges
Joined
Sep 17, 2020
Messages
98
Reaction score
122
Location
Seattle
Rating - 0%
0   0   0
Working on a new controller board. It is going in a cabinet next to my tank that had dvd/Blu-ray discs in it. I acquired it in the trade with the wife, but did not do anything with it until now.
8301D4FF-2D05-4189-B451-5A85345DD122.jpeg

Lower left corner is for the trident. Skimmer and ato controller won’t reach the cabinet and the heater controller will require short extension cords for the heaters. Not sure if I even want to bother with the mp 40 controllers because they can’t be unplugged from the motors department they don’t do anything with Mobius running. The 2 glass jars will become 3. One for alk one for cal and one waste for the trident. Looking for input or ideas.
What made you decided to move away from the control board you have by the stands side-door, running out of space?
 

FifteenYearsBand

New Member
View Badges
Joined
Mar 10, 2023
Messages
17
Reaction score
12
Location
Portland
Rating - 0%
0   0   0
Thanks so much for sharing this! We are looking into one of their INT tanks currently. Would be our first saltwater.

Any chance you like to show it off to strangers who live in pdx metro?
 

Form or function: Do you consider your rock work to be art or the platform for your coral?

  • Primarily art focused.

    Votes: 20 8.2%
  • Primarily a platform for coral.

    Votes: 43 17.7%
  • A bit of each - both art and a platform.

    Votes: 162 66.7%
  • Neither.

    Votes: 12 4.9%
  • Other.

    Votes: 6 2.5%
Back
Top