Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
That looks amazing man. Can’t wait
What's the plan for alk stability?
Looking forward to see this system! I've followed all your old builds on NR and this one looks like its gonna be a lot better.
If I still go mainly sps,just dosing
uses a red sea doser. That seems to work out pretty well
I remember one problem was that it's hard to get dosers that work for this kind of setup (lots of SPS with small water volume). The main thing is that it needs to be dosed regularly, at very small volumes
do you have any white? the nanobox beam don't have any white in them, you're gonna basically end up with all blue-violet... But if you don't care for white, I'd go the beams on one channel, and the violets on their own.So real quick,this is my first idea on a supplemental puck. I may add a true blue,but there already 2 between the 2 Beam strips.
@mitten_reef I have 3 channels I can work with,more if I use the nanobox ldd board,what do you think ? The Beam strips on 1 channel,violets on a 2nd what should the 3rd be ? Run the 2 Beam channels seperately and violets on their own ?
do you have any white? the nanobox beam don't have any white in them, you're gonna basically end up with all blue-violet... But if you don't care for white, I'd go the beams on one channel, and the violets on their own.
the beam with the 4 lead wires are set up as 2 separate channels in itself, idk how to make them to be one, just FYI. I used to be wired to a 2-ldd board (i.e. 2 wires per ldd channel). It might have something to do with the way the jumper ends are soldered, but i really dunno. same goes for the beam without the wires, you'll at least be able to light up 3 leds on that board, depending on if the peeled off terminal works or not. but the jumper end is also set to accommodate 2 channels there.
So I should be good to run the smaller of the 2 48v supplies since it should only push out whatever voltage it needs to power the array,up to 48v correct ?
Wasting no time getting those strips Mocked up huh?
I need to start looking into larger heatsinks for my 180 planted build here soon, until you reached out I hadn't touched my LED gear bins for like a year