MJ1200 losing gph?

[AdamNC]

Do these pumps lose their gph over time? I've cleaned the pump and cleaned the internal intake tube on my AquaC skimmer with a wire brush but I seem to have lost skimmate at the normal cup level. So clean pump, clean cup neck and no clogged intake tube. It also sounds quieter. The skimmer and pump are a little over 3 years old.

 

[harryball69]

Do these pumps lose their gph over time? I've cleaned the pump and cleaned the internal intake tube on my AquaC skimmer with a wire brush but I seem to have lost skimmate at the normal cup level. So clean pump, clean cup neck and no clogged intake tube. It also sounds quieter. The skimmer and pump are a little over 3 years old.

Get yourself a new propeller. old one wears down on the shaft and bores out the hole through it. normal wear. cheep fix.

 

[mcarroll]

no clogged intake tube.

You're talking about the injector, right?

As long as the injector is clear, then I'd have to suspect the impeller as mentioned above.

However I always tell folks to go back and break down the whole pump and skimmer one more time. Soak in vinegar if you didn't. Scrub with a brush if you didn't. You get the idea. :)

If you let the pump completely air-dry, calcium deposits are 100% easier to see. They're transparent when wet if they are thin enough....but they can still cause problems if they are in the wrong places.

 

[saltyfilmfolks]

Yup.

And yes. Everything wears out.

 

[AdamNC]

I figured as much but rather go through all the work first, thought I'd ask.