Mp 40 3 prong wire plug end

[markak]

Does anyone have any idea what wires on the plug end of a MP 40 are? Mine are pulling off the plug I and want to replace it. The color of the wires are Blue, Brown and Green, which is the hot, neutral and ground? I think Blue is hot, Brown neutral and Green is ground, but not sure. My wire I want to put on are the common White, Black and Green.

 

[jsker]

I would tend to agree with you. Do you have a volt meter? you can test set the meter for DC,

 

[markak]

Yes I do. I'll try that. If wires are hooked up wrong will that burn up the controller?

 

[Dapperjman]

Does the other end that plugs into the brick have markings for line, neutral, and ground? If so you could use a multimeter to check continuity.

 

[markak]

Does the other end that plugs into the brick have markings for line, neutral, and ground? If so you could use a multimeter to check continuity.

Are you talking about the controller (brick) end? Oh the transformer power supply

 

[Dapperjman]

I meant the transformer power supply end. I glanced at mine and it has letters for each slot.