Mp40qd shook off glass

[Rookums Reef]

My mp40qd shook off the glass, does the same when I use a new wet side, only 3 weeks old? I use the spacer, 120RR tank,been working fine since I got it! Bearing bad?

 

[blaxsun]

 

[nereefpat]

How thick is the glass, and what spacer are you using?

 

[Dburr1014]

Use smaller space or take it out completely

 

[Tumey]

My mp40qd shook off the glass, does the same when I use a new wet side, only 3 weeks old? I use the spacer, 120RR tank,been working fine since I got it! Bearing bad?

Do you even need the spacer? Do you have the dry side supported with the cord clips? Aligning the wet & dry sides can be finicky at times. I’ve struggled myself to get a good hold between the two but my glass is 1/2” thick.

 

[WVNed]

Make sure the wet side spins freely. If it is tight it will do this. Some need run at constant speed for a while to break in. Also make sure there is no bits inside from manufacturing.

 

[Rookums Reef]

How thick is the glass, and what spacer are you using?

1/2" and the appropriate spacer.

 

[Rookums Reef]

Removed the spacer and it's working fine, thanks y'all