Multiple power heads in a nano? (And how to clean them)

LordJoshaeus

Well-Known Member
View Badges
Joined
Oct 23, 2018
Messages
642
Reaction score
594
What state or country do you live in
Maine
Rating - 0%
0   0   0
I ordered a 211 gph pump for my 10 gallon saltwater I am cycling (actually I ordered two so I can swap the pumps and thus keep the tank running while I clean the main pump). Should I add a second, weaker pump to the opposite side of the tank to create more chaotic flow? And how (and how often) should I clean the pump? I am going to keep soft corals and the occasional LPS in this tank. Thanks :)
 
It's hard to get really good flow with a single pump. I don't know any reason they shouldn't be more or less identical pumps though.

Which pump did you pick?
 
It's hard to get really good flow with a single pump. I don't know any reason they shouldn't be more or less identical pumps though.

Which pump did you pick?
Since this is such a small tank, the aquarium coop powerhead. I don't want two of this exact pump in the tank because I am worried that will push the flow too high for soft corals, hence the second weaker pump.
 
I've no experience in something so small. But you can run one pump at a time with wifi outlets. Then just set up a schedule where the pumps alternate being on one at a time.

This will give you a nice tidelike flow.
 
When I started my 16 gallon 2 years ago, I had 1 pump and the return. Now I have 2 pumps because of growth. You will probably be fine with one until coral growth becomes sufficient. I clean both pumps monthly or so. Here are some recent photos:
IMG_1518.jpeg
IMG_1524.jpeg
IMG_1529.jpeg
 
When I started my 16 gallon 2 years ago, I had 1 pump and the return. Now I have 2 pumps because of growth. You will probably be fine with one until coral growth becomes sufficient. I clean both pumps monthly or so. Here are some recent photos:
IMG_1518.jpeg
IMG_1524.jpeg
IMG_1529.jpeg
How do you clean the pumps? Do you run them in some sort of solution in a bucket (vinegar maybe?) for a few hours?
 
How do you clean the pumps? Do you run them in some sort of solution in a bucket (vinegar maybe?) for a few hours?
Just scrub with brush and rinse. Once a year or so I soak in deluded pool acid for 20 minutes. Been told vinegar is bad for plastic and rubber.
 
I don't think you really want that kind of pump for flow in a reef. Check out some of the small circulation pumps intended for reefing. Some a really small!
 
Check out the Tunze 6040 or the Sicce Voyager Nano 1000 for two examples. There are others too! :)
 
Just scrub with brush and rinse. Once a year or so I soak in deluded pool acid for 20 minutes. Been told vinegar is bad for plastic and rubber.
Noted! I just googled vinegar and rubber, and it is a bad combo!
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 27.9%
  • I’d trust someone who knows my tank to choose

    Votes: 2 2.9%
  • I’d rather get a gift card and pick it myself

    Votes: 26 38.2%
  • I’d prefer gear or supplies instead

    Votes: 2 2.9%
  • Please don’t surprise me with livestock

    Votes: 19 27.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new