Multiple pumps is sump - bad ?

  • Thread starter Thread starter get-salty
  • Start date Start date
  • Tagged users Tagged users None
It's about how much water will drain back into the sump from the extra plumbing when the pumps are turned off, or when power goes out. You'll have to make sure your sump wont overflow from the extra water volume coming back down.

Since varios pumps don't produce a lot of pressure, I would go with the separate pump for the UV.
If you don't want any water to drain back into the sump from the uv/returns when you lose or kill power, you can get a one way check valve which will stop it.

These are the best ones...the price is pure ****, but they are pretty much a lifetime part.

https://www.bulkreefsupply.com/geor...747&indexName=brs_prod_m2_default_products[/
ah ok, right.. i will test and see and adjust the water lvl accordingly. thanks !
 
ah ok, right.. i will test and see and adjust the water lvl accordingly. thanks !
No trouble. If you DO go with a check valve, make sure you can clean it or test it periodically. You want to exercise the valve so that it moves freely and seals. But the nice thing about the one I showed you is you just unscrew the cap, pull the valve out and clean it.
 
My Jebao is rated 900 gph. I’ve dry test it at lowest setting and did the calculation - 240 gph… I’m guessing once it’s all connected with one L shape fitting , it’ll drop down a little bit. Think 200-240 gph help with controller itch ? Or should I get a smaller pump. Thanks
Is there a spec sheet for your UV sterilizer? Usually, it will advise a particular flow for protozoan control and another one for water clarity. Something like below? The 30 M/cm2 GMP and the 180 MJ/cm2. You don't quite have the range to do both on most pumps, so error toward you priority with your pump size.

1695766648298.png
 
Is there a spec sheet for your UV sterilizer? Usually, it will advise a particular flow for protozoan control and another one for water clarity. Something like below? The 30 M/cm2 GMP and the 180 MJ/cm2. You don't quite have the range to do both on most pumps, so error toward you priority with your pump size.

1695766648298.png
It’s an Aqua 25w. Yes I think for controlling parasites is <200gph but the Jebao 3500 doesn’t go that low. Might get a smaller pump. Appreciate your input !
 

TOP 10 Trending Threads

WHEN PLANNING CORAL PLACEMENT, WHAT USUALLY WINS? THE FUTURE COLONY, OR THE NEXT FRAG?

  • I leave plenty of open space for large future colonies

    Votes: 4 25.0%
  • I plan for growth...but occasionally squeeze coral into tight spaces

    Votes: 6 37.5%
  • I try to balance future growth with variety now

    Votes: 4 25.0%
  • I fit in as many frags as I reasonably can

    Votes: 3 18.8%
  • One more frag always wins! Future me can solve the problem...

    Votes: 0 0.0%
  • It depends on the coral and how quickly it grows

    Votes: 1 6.3%
  • I squeeze 'em in! Survival of the fittest, baby!!

    Votes: 0 0.0%
  • I’m already out of room, so apparently we know my answer...

    Votes: 1 6.3%
Back
Top
Home
Post thread…
Market
What's new