My 60B build thread

Now , I'll just let it run.
PXL_20250208_002932978.MP.jpg
 
I took some quick Par readings, since my Orphek Atlantik icon is new to me. Center of tank directly under the light was just over 300. Deeper at center bottom was about 220.As soon as I got off-center par dropped. At either end of the light it's dropped to about 100 at the rack.At the ends and corners par drops to about 50. It gives me choice on light intensity and with Gyre's at both ends, choice of flow too . Now the adventure truly begins.
 
It's alive! And it doesn't overflow if you turn off the return pump :)

Tore down my Fiji Cube 10 AIO and moved Sand, old water, and my bugs to the 60B

PXL_20250208_135721560.jpg
PXL_20250208_135715809.jpg
PXL_20250208_002932978.MP.jpg
 
Anyone else still use these little plastic bits to grow their bacteria on? I still have bags, receipt says I paid $45 for 5 pounds back in 2014. Sorry about the noise but phone was right in there.

 
In the reefing world, we have live rock to break down ammonia to nitrate, and since corals use ammonia we actually prefer not to use bioballs/biorings etc.

That light is beautiful, corals are going to love it.
 
Baffles came this morning for sump 2.0. I bought 30 minute, 100% silicone caulk, carefully following vendor's instructions yealds a very nice sump.
PXL_20250207_165946251.MP.jpg
PXL_20250207_165946251.MP.jpg
PXL_20250207_170126180.MP.jpg
PXL_20250207_203511474.MP.jpg
PXL_20250207_204048827.MP.jpg
PXL_20250207_221758583.jpg
PXL_20250207_223502924.MP.jpg
PXL_20250207_234943411.jpg
Nice looking build so far. What is the brand of the 30 minute 100% silicone caulk you used?
 
OK, where were we?
I have started moving frags and added few fish. Tank is in my work-from-home office, need fish to be my co-workers. I know what some people say about Green Chromis, but they are happy little fish.

PXL_20250214_145548229.MP.jpg
PXL_20250214_003300815.MP.jpg
PXL_20250213_105832391.MP.jpg
 
Back when I did acrylic work, I always offered tumbling media, same as larger applications in water treatment just smaller for our hobby. These little things:

PXL_20250210_183034912.jpg


In this sump the water level adjustment plate was just short enough to allow media to escape. Huge shout out to Marine Biosystems who sold me the sump kit. I reached out and asked if they could do custom one, we messaged back and fort a couple of times. Longer slots and little more height. I'll just say for very reasonable they made one and delivered. Here is picture of the original one.

PXL_20250215_172000691.MP.jpg


And these guys!

PXL_20250215_172300644.jpg


Finally picture from instructions on where this goes.

PXL_20250215_172305348.MP.jpg


And here is the results:

 
Few pictures from today.

PXL_20250216_151700893.MP.jpg


Full rack: now just let me pretties settle in and start growing. The downside of the zoa game , I threw out 11 dead plugs.
 
Back
Top
Home
Post thread…
Market
What's new