Hey all,
Wanted to do a spin off from my original Diy Saga build thread because this is starting to become something entirely different from what I had originally planned.
I'm still In the beginning stages but it is finally starting to come together after too much work and I'm digging it!
First for anyone not familiar with origin build thread. Heres a quick re cap of what I started off with-
I knew pretty much immediately that wasn't going to work as soon as I put water in it. And after a major over haul recently I added these equalizer pipes and daisy chained the tables together-
Removed 4 pumps from the system and added a bunch more flow through the system. All surfaces are natural skimming back to the skimmer in bottom reservoir.
I've also totally automated my pumps and lights with these wifi surge protectors-
Upgraded my Ro system to 6 stage RODI and had it professionally installed. It now direct feeds from my washing room adjacent to fish room.
I know I need an ATO it's on very soon to do checklist.
For now its hooked up directly to a float in my 1st reservoir.
Removed the chiller as it's not needed right now.
Important to add I used all 1 inch bulkheads and tubing. Everything was put together using ASI reef safe aquarium sealant and knock on wood I havent had a leak to date.
Any questions on the actual build I haven't covered hit me up I'll try to explain.
I'll be back with the fun stuff on the mushroom garden!
Wanted to do a spin off from my original Diy Saga build thread because this is starting to become something entirely different from what I had originally planned.
I'm still In the beginning stages but it is finally starting to come together after too much work and I'm digging it!
First for anyone not familiar with origin build thread. Heres a quick re cap of what I started off with-
I knew pretty much immediately that wasn't going to work as soon as I put water in it. And after a major over haul recently I added these equalizer pipes and daisy chained the tables together-
Removed 4 pumps from the system and added a bunch more flow through the system. All surfaces are natural skimming back to the skimmer in bottom reservoir.
I've also totally automated my pumps and lights with these wifi surge protectors-
Upgraded my Ro system to 6 stage RODI and had it professionally installed. It now direct feeds from my washing room adjacent to fish room.
I know I need an ATO it's on very soon to do checklist.
For now its hooked up directly to a float in my 1st reservoir.
Removed the chiller as it's not needed right now.
Important to add I used all 1 inch bulkheads and tubing. Everything was put together using ASI reef safe aquarium sealant and knock on wood I havent had a leak to date.
Any questions on the actual build I haven't covered hit me up I'll try to explain.
I'll be back with the fun stuff on the mushroom garden!
Last edited: