- Joined
- Apr 9, 2018
- Messages
- 145
- Reaction score
- 88
Going to setup two tanks for QT. I need to start adding fish to my 70 gallon tank. I currently only have one fish, Hoevens’ Wrasse. In the future I plan to add 150 gallon fish tank to the room. You can click on my build thread to see the progress. There is a ton of great information on this site. Wondering if I'm missing anything or should change things around?
I’m using @HotRocks thread as my base. https://www.reef2reef.com/threads/my-current-qt-process.483371/ at the bottom of his post are other articles.
(2) 20-Gallon tanks
Each tank will have
I built the stands with 2x4 and cut out an egg crate top
Placed the tanks in separate areas. Everything is 10 feet away from each other.
Here is the game plan.
Tank 1
I’m using @HotRocks thread as my base. https://www.reef2reef.com/threads/my-current-qt-process.483371/ at the bottom of his post are other articles.
(2) 20-Gallon tanks
Each tank will have
- Aqua Clear - Fish Tank Filter
- 75W EHEIM Jager heater
- Seachem Ammonia Alert
- Digital Temp
- Power head
- NICREW ClassicLED Aquarium Light
- BN-LINK BND-60/U47 Indoor Mini 24-Hour Mechanical Outlet Timer
- Fish net
- PVC hiding spots
- Hanna Copper Checker
- Selcon Vitamin
- API General Cure
- Copper Power
- Garlic Guard
- Methalyne Blue
- Seachem Focus
- MetroPlex
I built the stands with 2x4 and cut out an egg crate top
Placed the tanks in separate areas. Everything is 10 feet away from each other.
Here is the game plan.
Tank 1
- Label all equipment with a T1 (Tank 1)
- Put 10 gallon of display tank water into tank.
- Put 10 gallons of new saltwater into tank.
- Will lower salinity and try and match where the fish is coming from.
- Pull Aqua Clear filter from sump on display tank (2 months in sump).
- Make sure temp is same as display tank.
- Setup light timer to match display tank.
- Turn on powerhead and point up.
- Bring Copper to 1.5 ppm (Copper Power).
- Try and buy health fish
- Verify Salinity
- Float fish for 30-45 mins.
- Release into QT Tank
- Start to raise salinity to match display tank.
- Raise Copper ppm to 2 over the next 2-3 days.
- Half daily dose in AM
- Half daily dose in PM
- Dose MetroPlex
- Every other day for 10 days
- Prep Food (3 days’ worth) Feed while in tank 1.
- 1 tablespoon of food
- Add 1 scoop of API General Cure
- Add 1 scoop of Focus
- Add Selcon +
- Add Garlic Guard
- Test Copper daily
- Top off tank daily
- Feed daily
- Watch fish for next 14 days.
- Label all equipment with a T2 (Tank 2)
- Put 10 gallon of display tank water into tank.
- Put 10 gallons of new saltwater into tank.
- Make sure salinity matches Tank 1.
- Pull Aqua Clear filter from sump on display tank (2 months in sump).
- Make sure temp is same as Tank 1.
- Setup light timer to match Tank 1.
- Prep Food (3 days’ worth) Feed for first three days
- Observe to make sure no signs of intestinal parasites/worms
- If signs continue food until signs are gone
- Observe to make sure no signs of intestinal parasites/worms
- Transfer fish
- Two rounds of API General Cure 6 days apart
- 25% Water change before second dose
- Watch fish for next 14 days.
- Transfer to display tank