My waterbox peninsula 6025

We're rollin... now I'm gonna take a small moment before I clean up the wire, sync the ato, and adjust the lighting... just enjoy my labors lol

Also, should I run the skimmer now or give it a minute to circulate the bacter?

20250922_221258.jpg
 
Is 250ml of microbacter a good initial dose for the tank? Its a 6025 so sump included a total of about 195 gallons
 
Tank has been cycling, nothing new to tell other than the ATO is running and the UV (although not ideally hooked up) is connected but off at the moment. Tank has been running smooth accept my gyre's are a little loud and tired sounding so I'm thinking of running something along the lines of an mp60 but would like to utilize the hydros so idk if I will do an mp60. Also got a reef octo 200int classic that should be here in the next day or two so that will be fun (sarcastically).
 

Attachments

  • 20250926_032741.mp4
    39.5 MB
  • 20250926_032852.jpg
    20250926_032852.jpg
    138.5 KB · Views: 93
Got a good deal on this... well, atleast I thought it was a good deal lol... but I'm waiting on a stand before I squeeze it into the cabinet...

20250929_200952.jpg
 
got 2 gyres so I can swap the broken one and also going to pull the mp40... thats my evening.

20251002_155634.jpg
 
Got everything running but have a rats nest again... really want to get off the L2 next just to utilize my hydros to its max but all in time... I think I can officially stop messing with it for a bit but I really hate how my UV sits, and eventually have a turf scrubber to hook up but literally have no room for it...

Any ideas there im all ears, but it recommends having it over the sump incase of a leak and you can see my sump...
 

Attachments

  • 20251003_004434.jpg
    20251003_004434.jpg
    203.3 KB · Views: 47
  • 20251003_011948.jpg
    20251003_011948.jpg
    100.1 KB · Views: 49
  • 20251003_011350.jpg
    20251003_011350.jpg
    192.7 KB · Views: 54
Following along. Love my peninsula, although flow can be challenging with sand.
I seem to be getting a lot of sand movement on my left side and notice the little tstat I have floating in the tank keeps pulling that way too, not sure why the flow is going in that direction
 
Got everything hooked up, just put the orp in and they said give it a couple days to adapt to the new water, so we shall see. Otherwise, just did a water change, gonna test it tomorrow and if all is good gonna go get my first fish... im stoked.

Probably gonna play with the gyres a little bit first too and see if I can adjust how the current is....
 

Attachments

  • Screenshot_20251010_020023.jpg
    Screenshot_20251010_020023.jpg
    57.1 KB · Views: 67
  • 20251010_020734.mp4
    7.9 MB
Supposed to be a QT... but after this lol
 

Attachments

  • 20251024_152030.jpg
    20251024_152030.jpg
    154.9 KB · Views: 43
  • 20251019_094441.jpg
    20251019_094441.jpg
    164.8 KB · Views: 30
Little video of the new tank... minus the stand i put it all together for under $600. Pretty proud of it for a budget build. Haven't decided what I'm going to put in it
 

Attachments

  • 20251030_221149.mp4
    34.9 MB
Small update as we move forward through the ugly stage. The tank has been doing fairly well numbers wise but day by day right,lol. My calcium was really high so I put a couple of small frags.

I'm thinking of letting loose a little bit and adding some additional bioload (especially with some good weekend deals floating around), nothing crazy obviously but I'm thinking more mouths may help with overfeeding cause I am sure I have been over feeding. But the last couple of days I have just been feeding slowly and the guys pretty much hang out around the baster till they're full. 20251029_180747.jpg Screenshot_20251030_235424.jpg
 

Attachments

  • 20251101_193017.mp4
    101.9 MB
  • 20251101_193110.mp4
    21.9 MB
Last edited:
Cleaning up the rats nest so that I can make a new mess just to look at it and realize later this week im changing the lights so that's a whole other mess.... 🙄.

Has to be an easier way...lol
 

Attachments

  • 20251109_134140.jpg
    20251109_134140.jpg
    157.7 KB · Views: 67
Most recent update of the tank.
 

Attachments

  • 20251126_112639.jpg
    20251126_112639.jpg
    132.8 KB · Views: 33
  • 20251124_094823.jpg
    20251124_094823.jpg
    112 KB · Views: 32
Changes, updates, etc. So I have been consistent on weekly waterchanges, I'm doing 9hr light cycles, and have done fairly well at maintaining parameters starting at 7.9-8.2 dkh, this has now lately been more along lines of 8.0-8.3dkh, Ca 420-430 an occasional 440 but nothing greater, and Mg...(sigh) maintaining 1320-1350 but it has been dropping to 1290 so I do add foundation C to keep that up. When I noticed this it was dropping even lower so it took a solid water change and upkeep to get this more less in check.

Constantly reading and trying to shed light on this problem, I personally think it is my rock but I just continue to read and look for anything I don't know.

I changed my lights to Dalua x4, do want to add some blades and maybe/maybe not an extra x4. I'm honestly thinking of scootching my lights where the end does not get much direct light by right my par is 230-90 top half depending on where it is (mind you my lights are not "blanketing" my tank with the only 2 x4's) and anywhere from 120-70 on the bottom depending on how close to the rocks or direct the corals are. Corals seem happy, the video posted i have actually moved my acans from the shelf to the sand a little closer to the mushroom to see if the flow is better for it, and as well I have moved the lower acan a little bit back and in. Both seem a bit happier. Have tiny specs of coraline poking through on the rock closest to the overflow where the sps are sitting, so hopes that takes off good and doesn't stall along the way.. about maybe a month-month and a half ago (so busy the days kind of jumble) I added arcreef coraline spores. I believe 16 bottles total, let theme settle for an hour (thats all I was personally willing to give my fish) and consistent water changes.

I keep the water at 78 degrees at the ledge so back wall coming out of the overflow it is usually about 78.6 degrees (but have been kind of finding a theme so the direction may adjust a tad bit and if so I may be ok with slightly cooler temps but time will tell.

Try for 1.026 SG, unfortunately right now fighting to get back up from 1.025 but I think we may be good after this next waterchange, just wanted to make sure not to mix to heavy, so if couple changes it takes to get back, so be it. (Just switched to aquaforest and it has been mixing beautifully so definitely not mad at it)

Ph stays pretty consistent at 8.1-8.2, battling nitrates but not outrageously, currently .03phosphate was 11.8nitrates, back down to 8.8... thats my biggest learning obstacle and that is 100percent my fault because i am yet to create a strict regiment for everyone but i need to.

anyway there's a video of the tank below, hope everyone that watches it likes it and that's about it.


 
I feel like this isn't a very popular tank when I look around for inspiration but I always wanted one so here we go... I'll continue updating... I had to get away from the dang rock! Lol

It's a bit of a photo dump but the tank has come together nicely so far, I'm just trying to take my time, tomorrow is alot of cord management... and sand should be here 🤙🏽

20250623_174703.jpg 20250623_174927.jpg 20250623_183707.jpg 20250623_183703.jpg 20250623_183725.jpg 20250628_224705.jpg 20250703_220900.jpg 20250706_210237.jpg 20250711_215500.jpg 20250711_231558.jpg ad040add-25ae-4615-8477-ff1c0987489e.jpg 20250729_232112.jpg 20250814_223818.jpg 20250814_230454.jpg 20250814_230514.jpg 20250814_231056.jpg
I love peninsulas. I had two water box tanks for years till I upgraded to something bigger. Good luck, enjoy.
 
New updates, moved a few corals off a rack and changed the zoas to another rack but definitely wanna do something with them soon just haven't decided... but it's maturing and I love it.



20251219_155457.jpg
 
Last edited:
New update: was concerned about my nitrates creeping up, did a hefty change and vacuumed sump, got the nitrates back down but found some coral not looking to great. Fast forward bumped them back up to 11 -12 range and everything looks amazing. So I will be sticking around there and with letting stuff adjust for a while.
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 6 30.0%
  • Powerheads or wavemakers

    Votes: 2 10.0%
  • Sump or rear filtration chambers

    Votes: 2 10.0%
  • Skimmer or other filtration equipment

    Votes: 1 5.0%
  • Overflow or plumbing

    Votes: 6 30.0%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 2 10.0%
  • Other—tell us what I missed

    Votes: 1 5.0%
Back
Top
Home
Post thread…
Market
What's new