Need help, bad algae outbreak!

gmerfbox

New Member
View Badges
Joined
Aug 9, 2022
Messages
13
Reaction score
14
Location
Houston
What state or country do you live in
Texas
Rating - 0%
0   0   0
I tried manually picking off, buts it’s hard to get then used reef flux. But it didn’t work. Please help.

06CD8562-DD03-4CCD-B8CC-D6530E078A85.jpeg B0380BBD-106E-46A4-9B2E-F8DBE300CE8C.jpeg
 
We need complete tank parameters including light schedule and age of tank. What is your current cleaner crew? Looks like normal GHA but close up of branches would indicate if briopsis or not.
 
Tank is 1 year old. Fluval 13.5. I have the stock lights with an extra led bar, I run full lights 4 hours per day, with just the led bar blue for 2 hours before and after. I’m doing 1/4 water changes every 2 weeks. Had a bad bout with cyano 2 months ago and bought a rodi water system. Before that was using tap water.

I have 2 clowns and a cardinal fish
2 red hermits
2 small snails, don’t know exactly what type

The snails don’t seem to be eating algae, so I know I need more CUC, but seems like the fish stores don’t have good selections or much selection at all when I go.

PH - 8.1
Ammonia - <5
Nitrite - 0
Nitrate- 10-20 ppm
Calcium 360
Ca hardness 143.2
Phosphate 0
Salinity - 1.024

I have some zoas that have exploded in growth during the algae and then also some SPS (acropora I think) that was growing well, but now is turning white and dying.

Where do I start? I’m due for a water change basically now.
 

Attachments

  • 2CD1D945-18AF-49A5-AE6C-B806F658FD29.jpeg
    2CD1D945-18AF-49A5-AE6C-B806F658FD29.jpeg
    96.2 KB · Views: 79
  • 13258754-B9C3-4C19-A26A-2F2C595E2A15.jpeg
    13258754-B9C3-4C19-A26A-2F2C595E2A15.jpeg
    181.6 KB · Views: 54
  • 483009E0-61EA-40B1-B729-6C3C150EB48A.jpeg
    483009E0-61EA-40B1-B729-6C3C150EB48A.jpeg
    203.5 KB · Views: 86
Elbow grease and diverse cleaner crew. Calcium is low and phosphate is bottomed out. Weekly water changes. Cut lights to 6 hours with blue and UV only no whites. Raise magnesium to 1500. Pull out daily.
 
Thanks, just pull out by hand as best I can?
 
Tank is 1 year old. Fluval 13.5. I have the stock lights with an extra led bar, I run full lights 4 hours per day, with just the led bar blue for 2 hours before and after. I’m doing 1/4 water changes every 2 weeks. Had a bad bout with cyano 2 months ago and bought a rodi water system. Before that was using tap water.

I have 2 clowns and a cardinal fish
2 red hermits
2 small snails, don’t know exactly what type

The snails don’t seem to be eating algae, so I know I need more CUC, but seems like the fish stores don’t have good selections or much selection at all when I go.

PH - 8.1
Ammonia - <5
Nitrite - 0
Nitrate- 10-20 ppm
Calcium 360
Ca hardness 143.2
Phosphate 0
Salinity - 1.024

I have some zoas that have exploded in growth during the algae and then also some SPS (acropora I think) that was growing well, but now is turning white and dying.

Where do I start? I’m due for a water change basically now.
I feel your pain! Had the same stuff and still fighting it. Freaking sucks!
 
Tuxedo urchin and or Mexican turbos can help . Must get phosphates up and ammonia needs to be at zero . Watch the over feeding along with manual pulling . Wouldn’t hurt to dose bacteria like microbactor 7 . Cutting your lighting back can help even a total blackout for three days but because your tank is small you should be able to get it in line without black out .
 

WHICH PART OF YOUR SETUP IS HARDEST TO REACH OR REMOVE FOR ROUTINE MAINTENANCE?

  • Glass behind or beside the tank

    Votes: 11 18.3%
  • Powerheads or wavemakers

    Votes: 5 8.3%
  • Sump or rear filtration chambers

    Votes: 9 15.0%
  • Skimmer or other filtration equipment

    Votes: 8 13.3%
  • Overflow or plumbing

    Votes: 10 16.7%
  • Lights or lids

    Votes: 0 0.0%
  • Mine is pretty easy to access!

    Votes: 16 26.7%
  • Other—tell us what I missed

    Votes: 1 1.7%
Back
Top
Home
Post thread…
Market
What's new