Need help identifying this type of connector

[Gungo]

Long story short my KH carer waste water motor went bad. Kamoer did send a new motor but the motor didnt include the cables to connect it to the mainboard. I threw away the bad motor with its cables so Im looking around to see if someone can help me identify this connector. Chat GPT and Gemini says is a JST PH but pics does not look the same.

Any help will be greatly appreciated

 

[Jamie9]

Looks like maybe a thermistor connection, like a 2-pin XH2.54 female connector? is that a 3D printer or something?

 

[Freenow54]

Go to an electronics store or an HVAC Heating ventilation and AC dealer or phone a local HVAC company May have the connector

 

[FUNGI]

You can also try pretty much any Hobby/Electronic store...this is a standard item...think its Molex 2 pin.

 

[FUNGI]

worst case, solder the wires on the back

 

[Freenow54]

worst case, solder the wires on the back

I don't think they have anything threw it all away I think

 

[FUNGI]

I don't think they have anything threw it all away I think

How does the motor connect? Same type of connector?

 

[Gungo]

Old Motor: (This pics were sent to Kamoer when I was reporting the issue, I don't have the cables anymore).


New Motor:



As you see they shipped without any cables, and I don't have the old ones. I guess I'll need to go to an electronic store so they can adapt something to make it work. I never imagined I had to keep the cables...

 

[Sean Clark]

I just took this off of a kamoer pump the other day to fix my KH guardian. It looks the same. I can mail it to you if you want it.

 

[Gungo]

I just took this off of a kamoer pump the other day to fix my KH guardian. It looks the same. I can mail it to you if you want it.

Thanks man, it looks different to me. I don't know if it will work

 

[Sean Clark]

You are right, on second look it is different.

 

[FUNGI]

Old Motor: (This pics were sent to Kamoer when I was reporting the issue, I don't have the cables anymore).


New Motor:



As you see they shipped without any cables, and I don't have the old ones. I guess I'll need to go to an electronic store so they can adapt something to make it work. I never imagined I had to keep the cables...

Its an easy fix......if you have a soldering iron or take it to a store

 

[Freenow54]

Its an easy fix......if you have a soldering iron or take it to a store

Yes I recommend letting a pro do it not a job for an inexperienced person . Circuit boards are soldered for the most part with ultrasonic . Connections are very close together