Need help

[yangfan821014]

Just bought a second tank.But I think there are some parts are missing.Could anyone help me with that please?

 

[Crabs McJones]

First of all, I see this is your first post here, So with that. WELCOME TO R2R!

So the overflow is set up for herbie style. One will be your main drain with a gate valve, and the other your emergency overflow. Looks like there are pipes already inserted on the overflow bulkheads. If they're glued in you can either A: get new bulkheads for the overflow, or B: get a slip fitting to connect your pipe to the already glued in pipe. The return side you need to get a bulkhead with internal threads to thread your nozzle jet into.

Gate Valve: https://www.bulkreefsupply.com/spears-gate-valve-slip-x-slip.html
Slip Fittings: https://www.bulkreefsupply.com/schedule-80-coupler-slip-x-slip.html
Return Bulkhead: https://www.bulkreefsupply.com/bulkhead-abs-thread-x-slip-flange-head-side.html
Bulkheads for Overflow (if you don't want to use slip fittings to connect your pipes to the already glued in pipes) :
https://www.bulkreefsupply.com/bulkhead-abs-slip-x-slip.htmlDepended on the thread size of your nozzle, may need a bushing to adapt : https://www.bulkreefsupply.com/schedule-80-reducing-bushing-thread-x-thread.html

Hope this helps!

 

[yangfan821014]

First of all, I see this is your first post here, So with that. WELCOME TO R2R!

So the overflow is set up for herbie style. One will be your main drain with a gate valve, and the other your emergency overflow. Looks like there are pipes already inserted on the overflow bulkheads. If they're glued in you can either A: get new bulkheads for the overflow, or B: get a slip fitting to connect your pipe to the already glued in pipe. The return side you need to get a bulkhead with internal threads to thread your nozzle jet into.

Gate Valve: https://www.bulkreefsupply.com/spears-gate-valve-slip-x-slip.html
Slip Fittings: https://www.bulkreefsupply.com/schedule-80-coupler-slip-x-slip.html
Return Bulkhead: https://www.bulkreefsupply.com/bulkhead-abs-thread-x-slip-flange-head-side.html
Bulkheads for Overflow (if you don't want to use slip fittings to connect your pipes to the already glued in pipes) :
https://www.bulkreefsupply.com/bulkhead-abs-slip-x-slip.htmlDepended on the thread size of your nozzle, may need a bushing to adapt : https://www.bulkreefsupply.com/schedule-80-reducing-bushing-thread-x-thread.html

Hope this helps!

Thank you so very much!

 

[yangfan821014]

Thank you so very much!