need of pump advice

Reefermike

Active Member
View Badges
Joined
Jul 3, 2011
Messages
128
Reaction score
14
Location
Gulfport,ms
Rating - 0%
0   0   0
i am currently rebuilding my stand and thinking once that was done i woulld like to have 1 pump to do it all. . I plan on a biopellet reactor, carx gfo and carbon as well as return. It is a 120 and a 40 breeder sump. i was thinkin a waveline dc6000 or 10000. i guess more helpful woukd be what gph would you advise to run this . I am only looking for approx gph of corse. Once that is determined i will need to get advice on the manifold
 
I am one that prefers to get the tank flow from powerheads and only put 7x the total system through the sump per hours. for a 120 gal I would suggest the DC12000 as you will be able to dial it down whereas a too small pump will need to be replaced at some point
 
I also dont like using sump pumps as flow in the tank. But that aside, flow through the sump should be anywhere from 3-6 times your dt volume.
 

TOP 10 Trending Threads

WHAT KIND OF SUBSTRATE ARE YOU RUNNING ON YOUR TANK?

  • Bare bottom

    Votes: 8 16.7%
  • A shallow bed of fine sand

    Votes: 11 22.9%
  • A shallow bed of coarser sand

    Votes: 11 22.9%
  • A deep sand bed

    Votes: 8 16.7%
  • Mixed substrate or varying sand depth

    Votes: 10 20.8%
  • Some other substrate (posted in the comments)

    Votes: 0 0.0%
  • I don’t have a reef tank yet

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new