Neptune ALD OPEN/CLOSED

[BPiers]

Is it possible to have the default state of an ALD from OPEN to CLOSED?

I want it to be active and set an alarm when CLOSED, not OPEN.

Thanks!

 

[ngvu1]

I doubt that. I think if you explain why the heck you want to do that then there might be better answer :-)

Is it possible to have the default state of an ALD from OPEN to CLOSED?

I want it to be active and set an alarm when CLOSED, not OPEN.

Thanks!

 

[BPiers]

Ha. So here's my reasoning.
In fusion I've set my BoB switches so that for example when the switch is OPEN its ON. Like the door. When it's open the light is on

I want to have all switches grey when off and orange when on.
It's purely visual.

 

[ngvu1]

Can I see the programming code for this? You must check each port on the BoB because I don't know how you can do "If any of the port on the BoB is ON then...."

Anyway, I thought about what you asked and I think you can create a virtual out let which is the revert of your ALD probe.

Ha. So here's my reasoning.
In fusion I've set my BoB switches so that for example when the switch is OPEN its ON. Like the door. When it's open the light is on

I want to have all switches grey when off and orange when on.
It's purely visual.

 

[BPiers]

Sorry for the confusion.. The BoB is not tied to the ALD. I just want the "problem" or activated switch to show orange in fusion (open).
Not a huge issue. Just more of a curious it's for me

 

[evolved]

I want it to be active and set an alarm when CLOSED, not OPEN.

The problem here is a failure scenario. You really want an alarm if things end up in a failed state, and things like these almost always fail in an open state.