neptune trident manifold

mrdanielface

Community Member
View Badges
Joined
Nov 7, 2016
Messages
25
Reaction score
5
Rating - 0%
0   0   0
Wondering if anyone has ever tried to tackle this. I broke mine today and found out that its a $200 swap from neptune or a $65 part. And seeing that these typically clog or break I was thinking if this was a common issue and was already solved before i jump into it myself.

On close inspection the part seems like its cnc machined from a piece of delrin of sorts.

the part in question..part

also would fdm even be feasible or do I need a sla
 
Last edited:
I cad'd it if anyone wants to try it.
one thing i noticed tho, the 3 bottom connections are smaller than the top 3 but if i remember correctly the tubing is all 1/16 ID x 1/8 OD. Those are the ones that broke for me. Would make sense to just have them all the thicker size connections.
later checking.... the ID of the connection is actually smaller... maybe for metering.
tridentmanicad.jpg
 
I’m not so sure a print will hold up. Resin, cured then cross drilled maybe. I thought about a Delrin or nylon plug circle (round), cross drilled, and then pressing in cut pieces of something like the metal reagent tubes. Not something I’m really capable of these days but I’m still kicking it around.

When I ran into the same problem awhile back, a poster advised that with the official service program, one can strip the peri-pump head, the reagent tubing with needles, the manifold and even the pinch valves, prior to sending it in.

I’ve done all but the pinch valves myself and they didn’t care at all. I know that doesn’t help now, but if one is to do that at some point it’s a good way to get spare parts for future use.

What they charge for that part is a bit over the top. It should actually be included with the diy service kit. One poster said that they specifically asked for a manifold when they ordered the kit and it was thrown in free of charge. I tried and was told not a chance.

By the way, I don’t think the manifold does any metering per se (by the diameter of the barbs), but the back flush, after reagent is drawn in, and when the unused portion is sent back, is calculated. I believe there’s plenty of fudge factor in the tubing length for the reagent lines that a slight variation in the manifolds internal volume would be negligible.
 
Awesome. Thank you for the input. Curious if it will have the strength if printed sla. My buddy has a sla but this kinda gives me the excuse to get one. Easier to prototype and design when you own the manufacturing process. I do have a cnc but I want to see if this would give more access to people since sla printers are more common.
 

TOP 10 Trending Threads

HOW WOULD YOU FEEL ABOUT RECEIVING A FISH OR CORAL AS A HOLIDAY GIFT?

  • I’d love one, as long as it’s a species I chose

    Votes: 19 27.9%
  • I’d trust someone who knows my tank to choose

    Votes: 2 2.9%
  • I’d rather get a gift card and pick it myself

    Votes: 26 38.2%
  • I’d prefer gear or supplies instead

    Votes: 2 2.9%
  • Please don’t surprise me with livestock

    Votes: 19 27.9%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new