New Reef Octopus Regal 150sss Skimmer

  • Thread starter Thread starter Dolelo96
  • Start date Start date
  • Tagged users Tagged users None

Dolelo96

2500 Club Member
View Badges
Joined
Dec 29, 2014
Messages
3,453
Reaction score
18,605
Location
Jacksonville
Rating - 0%
0   0   0
Just setup my new Reef Octo Regal 150sss. The instructions really don’t go over breaking it in. I watched an old video that said leave it “open” for 2-3 weeks, soit’s at the lowest water level, to break it in. Does anyone have experience with this skimmer? How long did you leave it “open”? It already foaming, just very low. I have it in a RSR 425xl, 7 inches of water (on a stand). Previous skimmer was a Vertex Omega. They’re built completely different (not that it ever worked right):p
Thanks!
 
Just setup my new Reef Octo Regal 150sss. The instructions really don’t go over breaking it in. I watched an old video that said leave it “open” for 2-3 weeks, soit’s at the lowest water level, to break it in. Does anyone have experience with this skimmer? How long did you leave it “open”? It already foaming, just very low. I have it in a RSR 425xl, 7 inches of water (on a stand). Previous skimmer was a Vertex Omega. They’re built completely different (not that it ever worked right):p
Thanks!

@Jeff@CoralVue - can you help with this question?
 
LOL, I switched from a Vertex Omega 180i to a Octo 150sss. I had mine dialed in a few minutes. I will recommend not to raise the bubble line to the top of the cup as it will overflow quickly. I had mine at the middle of the vessel and raised if needed to get the skimmate I was looking for. The instructions are a little poor, so I played with the adjustments a little to see how it worked, but I started with the pump on level 3 and then raised it to level 4 and played with the gate valve to raise and lower the bubble line. Oh, and I found that the water level they recommend is spot on, 8 inches.
 
I need to get a new skimmer stand. The lowest I can set it raises the skimmer to 7 inches. Right now, the pump is running at 5. I think I’ll go lower the setting:p

Thanks!
 
Nice skimmer. Should take a week or two to break in. 7” is the bottom of what’s recommended but should be fine. Would run on 4-5 and leave gate valve all open for a week then give it a try at adjustment.
Why you no likey vertex?
 
If I have a tough skimmer to break in, I will run it in a remote sump that does not go to anything and pour skimmate in it to make it go crazy.
 
Nice skimmer. Should take a week or two to break in. 7” is the bottom of what’s recommended but should be fine. Would run on 4-5 and leave gate valve all open for a week then give it a try at adjustment.
Why you no likey vertex?
Ugh, Let me count the ways. Got it April 2017, and it would never stay “dialed in”. I can’t tell you how many times it overflowed and I had it locked in with the screw. Sometimes it needed to be raised to 7 inches, other times 8.5. When it worked, it was awesome, but it got to the point I had to turn it on and off manually when feeding the tank because I never knew if it would overflow. Getting through to customer service was difficult and spare parts non-existent. It just didn’t have consistent performance, at least for me.
 
Weird
Did you try adjust the air venturi directly connected to pump?
 
Yup. The one time I got through to customer service, I spent an hour on the phone and video chat with him. He had me tank everything apart, put back together, raise/lower, adjust the valve, etc. The biggest problem was keeping it dialed in. Black Friday came and hubby gave me the okay for a new one. Holidays are over, so I got it installed today. :)
 
Has been my experience that vertex is more stable but who knows.
Found on the vertex, pull air/venturi all the way out/full air, and use gate valve to adjust. Never had to change once dialed in. A cup full a week. With ro have to play with gate valve to collect that same cup of thick nasty a week. Not trying to be a negative nelly, it’s a sweet skimmer, Enjoy what Santa brought you
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new