Just received my new Reefer 170 and going to keep updating as time goes by.
This is an upgrade from a 15 gal all in one tank, only using this tank to quarantine my new frags but also going to stock with some fishes, currently have these in mind for stocking: Tail spot blenny, McCosker's flasher wrasse, rainford goby and a basslet or a dottyback (any recommendations on either would be appreciated)
Mainly planning to stock with LPS (euphyllia, acans and goni’s) and some SPS acros and also some birds nest’s.
Equipment so far is: Reefer 170 with white stand, 2 Hydras 32HD, Apex Neptune controller with probes, single mp10 ecotech, Classic 110SSS 5" Internal Space Saving Protein Skimmer - RO, Syncra SDC 3.0 as main return pump, Eheim Trutemp 200w, Prime fuge AI, 8W Adv 2000 uv by Aqua and also got a mini BRS reactor with pump set (thoughts on what to run on reactor?)
Making some mods in sump and turning the 1.5 Gal ATO system into a mini fuge to culture my own pods with a In and out overflow which will be fed by a sicce syncra silent pump right after filter sock and drain will go directly to return pump.
Before I start putting anything together and get the tank wet is there anything I’m missing? I want to make sure I set this up properly from the beginning and not have to take it apart given the limited space.
I will start posting pictures of the project once it’s all set and properly laid out.
Thanks for any recommendations or tips!
This is an upgrade from a 15 gal all in one tank, only using this tank to quarantine my new frags but also going to stock with some fishes, currently have these in mind for stocking: Tail spot blenny, McCosker's flasher wrasse, rainford goby and a basslet or a dottyback (any recommendations on either would be appreciated)
Mainly planning to stock with LPS (euphyllia, acans and goni’s) and some SPS acros and also some birds nest’s.
Equipment so far is: Reefer 170 with white stand, 2 Hydras 32HD, Apex Neptune controller with probes, single mp10 ecotech, Classic 110SSS 5" Internal Space Saving Protein Skimmer - RO, Syncra SDC 3.0 as main return pump, Eheim Trutemp 200w, Prime fuge AI, 8W Adv 2000 uv by Aqua and also got a mini BRS reactor with pump set (thoughts on what to run on reactor?)
Making some mods in sump and turning the 1.5 Gal ATO system into a mini fuge to culture my own pods with a In and out overflow which will be fed by a sicce syncra silent pump right after filter sock and drain will go directly to return pump.
Before I start putting anything together and get the tank wet is there anything I’m missing? I want to make sure I set this up properly from the beginning and not have to take it apart given the limited space.
I will start posting pictures of the project once it’s all set and properly laid out.
Thanks for any recommendations or tips!