New tank

leonbramdean

New Member
View Badges
Joined
Mar 19, 2014
Messages
15
Reaction score
0
Rating - 0%
0   0   0
Hiya I am building my own tank from acrilic
The dimenthions are going to be 10ftx2.5ftx2ft so big.
It will be made out off acrilic anybody got any tips ideas notes and ways I could do it
And the best place to get cheep acrilic in the uk
Thanks leon
 

JPG@CFI

Active Member
View Badges
Joined
Jan 31, 2013
Messages
120
Reaction score
44
Location
Seattle, Wa
Rating - 0%
0   0   0
Leon,

I don't know what is available in the UK, but I'd get ahold of a plastic supplier in the nearest large city. See what sheet sizes you can get, and don't go with the cheapest brand. You will need to bong the acrylic together and the better brands will pay big dividends when it comes time to hold water for 20 years plus. In the US Polycast is the best brand for consistency. Weld On products for the cement, and for your application, you should look at the Weld On 40 or 42. With that foot print, you should be looking at least 3/4" if not 1" for the body. 3/4" for the top and bottom panels. If you have little to no experience with acrylic fabrication, I would urge you to build a sump or a small tank first. I have been call upon to save a home build more than a few times. Most were total failures, and ended up costing way more than would have cost t have me build it in the first place. Education is never cheap! Good luck, my friend, J
 
OP
OP
L

leonbramdean

New Member
View Badges
Joined
Mar 19, 2014
Messages
15
Reaction score
0
Rating - 0%
0   0   0
Thanks for that but I am good at building glass tanks so thought I better give acrilic a go
Thanks
Does anyone have any fundraising ideas for this project
 

JPG@CFI

Active Member
View Badges
Joined
Jan 31, 2013
Messages
120
Reaction score
44
Location
Seattle, Wa
Rating - 0%
0   0   0
Being good at building glass tanks? Acrylic is a way different animal than building a glass tank. You need precision machined edges for bonding. A few thousandths out, and you will not have a solid bond. It might hold for a week, or a month, but at some point you will have 350 gallons of water on your floor. If you can't pay the tab for even the plastic, then your in the wrong hobby. Good luck, wanker!
 
OP
OP
L

leonbramdean

New Member
View Badges
Joined
Mar 19, 2014
Messages
15
Reaction score
0
Rating - 0%
0   0   0
Hiya I am building my own tank from acrilic
The dimenthions are going to be 10ftx2.5ftx2ft so big.
It will be made out off acrilic anybody got any tips ideas notes and ways I could do it
And the best place to get cheep acrilic in the uk
And any sponcers
 

TOP 10 Trending Threads

HOW DO YOU ADJUST YOUR CUC AS ALGAE DISAPPEARS?

  • Capture and re-home CUC

    Votes: 9 7.7%
  • Increase white light/hours in tank to spur algae growth to feed CUC

    Votes: 8 6.8%
  • Feed nori to support CUC

    Votes: 39 33.3%
  • Feed herbivore pellets to support CUC

    Votes: 41 35.0%
  • Allow attrition to balance CUC and algae

    Votes: 51 43.6%
  • Provide macro algae to feed CUC

    Votes: 8 6.8%
  • Introduce CUC predators

    Votes: 1 0.9%
  • Other (please explain)

    Votes: 11 9.4%
Back
Top