NEW: WIN a Puratek Auto Level Controller! FREE to enter! - Claimed

[revhtree]

Puratek Auto Level Controller Giveaway!
Sponsored by our newest R2R sponsor Puratek

How to Enter:
1. LIKE the Puratek FACEBOOK page here: PURATEK FACEBOOK PAGE
2. Create a NEW aquarium related thread/topic in the forums. (no selling & keep it interesting) Copy the link in a separate post in this thread.
3. Make a post in this thread about what you like about the Puratek Auto Level Controller. (there is a lot to like)

Drawing
On December 10th we will pick one winner by random draw from this thread and the winner will be verified to have completed all requirements including a facebook check.

The Prize
The name drawn will receive brand new Puratek Auto Level Controller shipped to their door valued at over $230.00!

The Auto Level Controller, an Auto Top-Off system, is an ideal addition to any aquarium system. It is natural for water to evaporate on a daily basis and requires constant attention to maintain proper water levels. If not maintained on a regular basis in saltwater systems, the salinity will rise as the water evaporates because salt will not evaporate. These fluctuations in salinity can cause undue stress to your inhabitants.Using an auto top off system alleviates the daily activity of having to add fresh water on a regular basis. Performing this aquarium husbandry is a tedious, unrewarding task and can leave you in despair if not done properly.

This modern approach to auto level controlling is ground breaking to the industry and offers features never seen before in such an important piece of equipment seldom overlooked. Read More Here

Features

Maintains consistent salinity
Non-intrusive sensors that attach to outside of aquarium or sump so no worry about sticky or leaking mechanical sensors. Also snails or crabs will not interfere with operation
85 dB Audible alarm to notify of abnormal high or low water level or if the maximum water make up time has been exceeded
Standby switch – Temporarily disable level control while performing maintenance; for example, water changes or cleaning that could false trigger sensors
Alarm reset/program mode switch – silence alarm or initiate program to allow custom settings for max run time, hysteresis and level sensor selection
Supports up to four level sensors for normal (makeup control), low, high and top-off reservoir levels
Controls top-off water pump in makeup water reservoir or solenoid valve for connection directly to R/O filtration system
Low voltage 12VDC control for safety and low power consumption
Programmable max-run-timer counters to prevent top-off water running too long in the event sensor fails
Programmable hysteresis setting to control time delays in activating alarms or control due to water ripple or other disturbances in the water that could cause false alarms or control
Status LED for each level sensor for easy sensor status and program mode indicators
Processor controlled to maximize flexibility and expandability in feature offering and upgrades
Interfaces to Insight 24/7 Monitor/Controller for complete system integration for…
Audible and remote email alarming
Maximize system control in the event water levels are incorrect – shut pumps or chillers off to prevent damage
Notifications of when top-off water is being added
Keep log of how often top-off water is being added
Perform firmware upgrades

Thanks again to Puratek.com!
Puratek Reef2Reef Forum

 

[vic5hands]

Really nice would like to give it once around try

 

[HiddenUser]

Pretty nifty that it interfaces with the Puratek Insight controller.

https://www.reef2reef.com/threads/can-you-cycle-your-aquarium-for-too-long.222307/

 

[Jlobes]

I like the service and product support that puratek offers, seems superb!!

like the FB page, long ago.

new thread, on the way.

although, i did just start this thread recently, and would like the feedback/exposure. haha

http://reef2reef.com/threads/first-fish-planning-a-fish-list-for-120g.221110/

 

[ebushrow]

1. Done
2. I like the interface of the puratek especially

 

[GXPKY]

Liked on facebook! I just like the ability to keep the salinity levels of my tanks stable, ive used a more "primitave" ato for quite some time and from what ive read so far this seems like a major improvement.

Just starting a new 150 cube build actually, previously i have had 5 other saltwater setups ranging from a 29 cube to a 245 gallon reef.

https://www.reef2reef.com/threads/gxpkys-marineland-150-cube-build.221660/

 

[teamx151]

Like their FB page.

I like the fact that you can monitor your system and get notified via email if you have any issues with your ALC and the sensors are pretty ingenious.

 

[Salty0331]

FB liked

 

[Salty0331]

Posted.....https://www.reef2reef.com/threads/alright-what-did-you-do-today.221724/

 

[Salty0331]

I would have to say I like the interface the most.....from the compatibility to the state of the art technology. Most of all they think ahead with the ability to upgrade.[emoji106][emoji3]

 

[thefuz]

Big fan of this unit particularly for the logging and UI. Hope to have the chance to try out a comped version!!

 

[JedClampett]

1. Done

 

[JedClampett]

2.https://www.reef2reef.com/threads/your-weekend-buys.221726/

 

[JedClampett]

3. I would love to win one, because right now I'm topping off my water morning and night, and I would love not to have to worry about it as much with this controlling it

 

[nmohr6]

Liked on FB

 

[WillieD]

Def need this...I have a JBJ ATO in need of a new one.

 

[Smotz]

Liked!

 

[Watevadog5]

I like the fact I won't have to manually top off my tank everyday interface is also a huge +

 

[Smotz]

Interesting topic:
https://www.reef2reef.com/threads/zoas-dont-grow.221861/

 

[Smotz]

I really like how high tech this controller is. I also like how the sensors are on the outside so the saltwater doesn't break it down over time, a snail or other creatures will not affect it, and algae won't grow on it.