Noopysche hurting eyes

Yes and I dontbuse the Noopsyche app. The app that @bitbarista created using an ESP32-S3 is much better with smooth ramping and much more.

Easy to set up, All you need is a ESP32-S3, flash it, connect it to the lights WiFi and away you go.
If i continue with the light I'm definitely going the ESP32 route.
 
The ESP32 doesn’t change the PWM, it just sends commands to the on-board controller, similar to you using the buttons or sliders in their terrible UX. From what I gather it is far better than their software though.
 
The ESP32 doesn’t change the PWM, it just sends commands to the on-board controller, similar to you using the buttons or sliders in their terrible UX. From what I gather it is far better than their software though.
Yep, I get that. But it gets rid of.the annoying fact I have to change network connections everytime you want to.to something on the light.
 
Yep, I get that. But it gets rid of.the annoying fact I have to change network connections everytime you want to.to something on the light.
All good, just wanted to make sure you understood. Their application is terrible. That is why I built the profile generator, the EP32 project takes that a step further.
 
All good, just wanted to make sure you understood. Their application is terrible. That is why I built the profile generator, the EP32 project takes that a step further.
And thank you for your work on that profile builder. Saves a lot of aggravation.
And I built a BeanAnimal drain on my big discus tank years ago.
It's a real treasure to have you on this forum!
Thank you for all you do for the community.
 

Well this is interesting notice the light on the back wall. I can't see this with my naked eyes.
Disclaimer I know little to nothing about LED drivers but when uninstalled my meridian 45 I was unable to take video because the light caused the screen to roll. Cameras can be affected by things the human eye can not see and doesn't necessarily mean the light is malfunctioning. Reefbreeders has made some updates and it's better now but I still have to manually slow my shutter speed down below 1/60th of a second to take still images or the screen just continuously rolls. May it may not be the issue your having but the post is here with some good info from some knowledgeable in led technology.

https://www.reef2reef.com/threads/meridian-45-rolling-pattern-using-camera.1162761/
 
Disclaimer I know little to nothing about LED drivers but when uninstalled my meridian 45 I was unable to take video because the light caused the screen to roll. Cameras can be affected by things the human eye can not see and doesn't necessarily mean the light is malfunctioning. Reefbreeders has made some updates and it's better now but I still have to manually slow my shutter speed down below 1/60th of a second to take still images or the screen just continuously rolls. May it may not be the issue your having but the post is here with some good info from some knowledgeable in led technology.

https://www.reef2reef.com/threads/meridian-45-rolling-pattern-using-camera.1162761/
I'm not discounting the fact that the video could certainly be the result of the camera sensor searching for white balance or whatever.
But the fact remains it hurts to look at the tank for some reason. As soon as my AI Prime arrives I'll switch it out and see how my eyes feel.
 
Does it still hurt when the spectrum is changed so it's not so blue? Not defending the lights at all. Many peoples senses are affected differently. If your in the US and want I can send you a used k7 pro III to try out free of charge. I have 7 on the shelf and no takers when I offered some for sale. Send a PM if you want one. I have way to much stuff on the shelf.
 
Does it still hurt when the spectrum is changed so it's not so blue? Not defending the lights at all. Many peoples senses are affected differently. If your in the US and want I can send you a used k7 pro III to try out free of charge. I have 7 on the shelf and no takers when I offered some for sale. Send a PM if you want one. I have way to much stuff on the shelf.
That's a very kind offer. The funny part is it's just not me. My son and wife both have the same results.
She was trying to watch the yasha goby and pistol shrimp do their thing and she says she just can't look into the tank. My son says the same thing.

When setting up the light about a month ago I was changing profiles a fair bit, some with less white some with more, etc. None of them made a difference.
At this point I'm going to wait for my new AI Prime to arrive and see what the results are. I don't want to keep switching lights as I want the tank to settle in.
But I will say, the corals do look like they are thriving under the K7. My duncans are a gorgeous neon green.

 
I have been running the III and IV and have no complaints. i do not run my lights super blue. i get a headache starting at any tank that is full of windex
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.5%
  • I decorate AROUND the tank or stand

    Votes: 4 18.2%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 13 59.1%
  • We don’t decorate for the holidays

    Votes: 4 18.2%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new