Noospyche pro k7 II

[salvi_bo]

It was throwing me an error message and then changed the time from 00:00 - 23:59 and it changed to LPS timer error. I have seen videos where you get the time option and k7 and other options. Im.not getting it on this one. Also I tried resetting but keeps coming back to the same screen message. Thanks for your response and help.

 

[tbrown]

It was throwing me an error message and then changed the time from 00:00 - 23:59 and it changed to LPS timer error. I have seen videos where you get the time option and k7 and other options. Im.not getting it on this one. Also I tried resetting but keeps coming back to the same screen message. Thanks for your response and help.

That's the K7 V3. The Pro II you choose A (auto), then LPS, SPS, or mixed, then A. The "start" time has to be at 1% for any channels being used and the "end" time has to be 1% with the Pro II. If you sit idle for too long (like 15-20 seconds) it will go back to the main menu. It saves your progress if I recall correctly.

 

[salvi_bo]

That's the K7 V3. The Pro II you choose A (auto), then LPS, SPS, or mixed, then A. The "start" time has to be at 1% for any channels being used and the "end" time has to be 1% with the Pro II. If you sit idle for too long (like 15-20 seconds) it will go back to the main menu. It saves your progress if I recall correctly.

Thank you for your response. Do you think I'd be able to set the actual time after that ? Because right now there is no time clock showing.

 

[tbrown]

Thank you for your response. Do you think I'd be able to set the actual time after that ? Because right now there is no time clock showing.

On the main screen (not pictured) there should be a T if I remember right. That's how you set your time.

 

[salvi_bo]

On the main screen (not pictured) there should be a T if I remember right. That's how you set your time.

That is the (T) I'm not seeing at all. Nor the k7 option all is see are these in the picture.

 

[tbrown]

That one has a MicroSD? You might reach out to either @noopsyche or @Zach B and see if they have any firmware they can send you to update the card.

 

[tbrown]

Yeah, I wonder if your firmware is corrupted..

What do the H and the F do?

 

[tbrown]

Hold down the button and see if it will go to the main screen.

 

[salvi_bo]

Yeah, I wonder if your firmware is corrupted..

What do the H and the F do?

The F is like a demo and H is the transmit

 

[salvi_bo]

That one has a MicroSD? You might reach out to either @noopsyche or @Zach B and see if they have any firmware they can send you to update the card.

I send @Zach B message, hoping he can help

 

[Jimbhoy13]

Welcome to R2R. Hope you solve your problem.

 

[PPBlimpy]

I don't think ZachB is on the site anymore. He announced his retirement from noopsyche and R2r a couple weeks ago.

i have k7 v2 pros and k7 v3s. i bought them used. guy was supposed to send 4 k7v3s anyways i am still bitter about it.

i don't recognize that controller so I am guessing the one I have is from the k7v3s

my v2 pros are currently running some other schedule and i have no control over. they just turn on and off approx the same time as my v3s.

i reached out to noopsyche and they cant help with the older stuff. but zachb did say the newer controller can work with the v2s.

they are good lights once you can control them. not as powerful as the v3s though. i believe they are only 90w vs 140w.

if you get frustrated and want to sell i would be interested in them.

 

[tbrown]

I don't think ZachB is on the site anymore. He announced his retirement from noopsyche and R2r a couple weeks ago.

i have k7 v2 pros and k7 v3s. i bought them used. guy was supposed to send 4 k7v3s anyways i am still bitter about it.

i don't recognize that controller so I am guessing the one I have is from the k7v3s

my v2 pros are currently running some other schedule and i have no control over. they just turn on and off approx the same time as my v3s.

i reached out to noopsyche and they cant help with the older stuff. but zachb did say the newer controller can work with the v2s.

they are good lights once you can control them. not as powerful as the v3s though. i believe they are only 90w vs 140w.

if you get frustrated and want to sell i would be interested in them.

My Pro II wasn't controllable with my V3 controllers.

You are correct, 90 watt vs the 140 on the V3 and Pro V3, and also less controllable channels I believe.

 

[PPBlimpy]

My Pro II wasn't controllable with my V3 controllers.

You are correct, 90 watt vs the 140 on the V3 and Pro V3, and also less controllable channels I believe.

I didnt think it would work. haven't tried yet myself either.

I am looking for 2 of each the v2 pro(with controller) and v3 non pro.

i have a 300G 96x30 i am trying to light on the cheap. figured 4 v2 pros across the front and the v3 across the back rockwork and i should have plenty of light

 

[salvi_bo]

My Pro II wasn't controllable with my V3 controllers.

You are correct, 90 watt vs the 140 on the V3 and Pro V3, and also less controllable channels I believe.

My Pro II wasn't controllable with my V3 controllers.

You are correct, 90 watt vs the 140 on the V3 and Pro V3, and also less controllable channels I believe.

I don't think ZachB is on the site anymore. He announced his retirement from noopsyche and R2r a couple weeks ago.

i have k7 v2 pros and k7 v3s. i bought them used. guy was supposed to send 4 k7v3s anyways i am still bitter about it.

i don't recognize that controller so I am guessing the one I have is from the k7v3s

my v2 pros are currently running some other schedule and i have no control over. they just turn on and off approx the same time as my v3s.

i reached out to noopsyche and they cant help with the older stuff. but zachb did say the newer controller can work with the v2s.

they are good lights once you can control them. not as powerful as the v3s though. i believe they are only 90w vs 140w.

if you get frustrated and want to sell i would be interested in them.

You can email me please and we can exchange information. [email protected]

 

[Jonreefer]

I made this video years ago when I had a set of K7II on an old tank

 

[PPBlimpy]

I made this video years ago when I had a set of K7II on an old tank

nice video. will come in handy!

 

[BryanM]

Hello everyone, I acquired a set of noospyche k7 pro II lights but the controller won't give me the option to program it. I saw frw videos where it gives the option of k7 and then it can be transmitted, im.not getting any of those options on mine. Is there another controller compatible? Thank you all.

Welcome Aboard!

 

[salvi_bo]

I made this video years ago when I had a set of K7II on an old tank

Hey nice to meet ya.. I saw this video. Thats when I realized that I wasn't getting the same screen I was seeing on mine. Does your have a SD card in the controller. I noticed mine has a slot but there isn't a SD card.

 

[Jonreefer]

Hey nice to meet ya.. I saw this video. Thats when I realized that I wasn't getting the same screen I was seeing on mine. Does your have a SD card in the controller. I noticed mine has a slot but there isn't a SD card.

oh its been years since I had these lights. I will say i dont ever recall putting an SD card in.