Oh no, not another overflow question! :)

  • Thread starter Thread starter ErinD
  • Start date Start date
  • Tagged users Tagged users None

ErinD

Active Member
View Badges
Joined
Jan 7, 2020
Messages
111
Reaction score
69
Location
Philadelphia, PA
What state or country do you live in
Pennsylvania
Rating - 0%
0   0   0
I know, I know - there's a ton of these on this (and other) forums - but this one is slightly different and comes from a slightly different place of intention.

I'll start with the foundation -
45 gallon mixed reef
HOB Octo protein skimmer
Canister filter for mechanical filtration
mixed live and dead rock

My refugium build is small - 5.5 gallons - really just looking for a place for chaeto, pod nursery and to get my feet wet in refugiums.

I won't be drilling this tank, so a HOB overflow with siphon is my toast and jam for this build.

Here's my question:

Because I won't be incorporating anything more than a filter sock for filtration in this sump, do I need anything more than a nano hang on back overflow with a max flow rate of 200 gph? This isn't so much a question based on price, but on utility. Would something larger even be beneficial for any other reason than if I wanted to utilize it for a full filter system (or protein skimmer incorporation) in the future?
 
I'd consider a bigger overflow, not for the flow, but because bigger overflows have at least 2 drains. One single drain in a nano hang on would keep me up at night.

The flip side to that though, since your refugium is so small, there's not a ton of extra water that will be pumped over the rim of the display if the siphon quits or the drain gets blocked.
 
I'd consider a bigger overflow, not for the flow, but because bigger overflows have at least 2 drains. One single drain in a nano hang on would keep me up at night.

The flip side to that though, since your refugium is so small, there's not a ton of extra water that will be pumped over the rim of the display if the siphon quits or the drain gets blocked.
I'm less concerned about the 1 outlet than I am the flow of water going into that small of a sump. BUT, I'm more concerned about a nice, efficient, well tuned in and out than I am the cost. The nano has a 3/4" outport whereas the next step up is a 1" - the pump I'm planning to use is a 1/2", so I was drawn to the nano for that reason as well. As norm, I'm coming back up with 5' of head so I just wasn't sure that a bigger flow would do anything more than complicate in such a small stop over as 5 gallons.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 17 18.9%
  • Fish or coral food

    Votes: 5 5.6%
  • Test kits or reagents

    Votes: 9 10.0%
  • Filter media or replacement fleece

    Votes: 5 5.6%
  • RO/DI filters or supplies

    Votes: 14 15.6%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 10 11.1%
  • I keep a backup of everything

    Votes: 23 25.6%
  • Other (Post in the comments)

    Votes: 7 7.8%
Back
Top
Home
Post thread…
Market
What's new