Your case is an interesting one- likely very atypical to most modern reefers given your methodology. And yes, if you can smell ozone there's probably more than necessary going in since a detectable amount is being gassed off before reacting with organics in the water. The contact time in your skimmer probably smokes most of what people with similar sized tank volumes are running. Maybe not in terms of air induction, but certainly raw time of water passage given it's extreme dimensions relative to skimmers that fit under an average tank stand. Also, how old is that PVC in your skimmer??? I don't have exact data on when tin-based heat stabilizers were added to PVC manufacturing, but I'd wager your 30yr old skimmer might just be out of range haha. And in any event, has almost certainly leached out all the available tin in the immediate surfaces of the pipe with so many years of water and ozone exposure. I can assure you tin leaching has been an issue with modern, fresh PVC in many cases and seems to be exacerbated by ozone exposure. I had it for a time in a personal tank years ago before ICP testing when I was reacting a small amount ~10mg/hr ozone through a PVC pipe chamber. Within a couple months Acros and chalice started showing odd blistering bubbles under the tissue out of nowhere. Only change that was made was the ozone and once removed the issue was resolved. I later found out from others who'd traced this symptom through testing that this was a tin poisoning issue brought on by PVC leaching. I just hope those new to the ozone game don't overdo it as I've never seen a tank not grow coral or have healthy fish for lack of having ozone, but have certainly seen the reverse. I think it's pretty safe stuff if used with caution and planning but as we all know it's easy to get excited about new gear and overdo stuff in this hobby so I want to impress that there are potential pitfalls on any new ozone users.
Now, I don't want you to do this if you feel the ozone is integral to your tank's system, but I wonder how comfortable you would be with shutting it down for say like 2 or 3 months. And during that time maybe add a fish or two to the system. Perhaps one that had been exposed to marine velvet. That would really put a test to the immunity through husbandry theory by removing the factor of the strong sterilization effect your liberal use of ozone in a large skimmer undoubtedly has on the system. The ozone may have zero impact on your fishes disease resistance, or it may be the whole story right there... I honestly have no idea, but am super curious now that I am aware of the way in which you implement ozone. It would be a very interesting topic of study for sure. And don't get me wrong, owning a service business I have to operate on the principle of disease resistance through husbandry on tanks that I did not have the liberty of stocking initially with fully QT fish and the client was unwilling to go through a fallow period on. Big UV and ample feeding with efficient filtration has always been my best avenue to success in those disease compromised tanks. I sell only fully QT'd livestock, but have to work within the realities of my clients' imperfect tanks. Currently have no known disease issues in the field so both methods work to my mind. Just curious if you believe your ozone is integral or just a cherry on top of the husbandry aspect. Cheers.