Im still building this. I seald all the capacitors with urethane and Im getting a glass 1x1x1 tank with 2 120mmx240mm radiators with fans and they run through these
Those are tek plates sandwiched between a heat sink and the aluminum water block. The whole pc is going to be an oil submerged PC that pumps the oil through the radiators and the chilling tek plates. The tek plates can he turned on or off and the controller allows me to give up to 24v2a for splitting 12v 2a each for max power to both.
Urethane coats all joins sealed by glue on the acrylic skeleton and i will use nitrile calking to seal the glass aquarium. The oil will stay an inch and a half to 2 inches below the tank line to prevent wicking. It will be entirely wireless aside from the power cable.