pH Controller and Calibration Question

Steve Erekson

Active Member
View Badges
Joined
Apr 6, 2019
Messages
207
Reaction score
281
What state or country do you live in
Georgia
Rating - 0%
0   0   0
I purchased a used Reef Fanatics pH controller for a very low price off a local hobbyist recently, hoping I would be able to put it to use on my nano as a way to prevent accidental kalk overdoses. My issue is this pH controller was designed for calcium reactor use and therefore only has calibration points at 4.0 and 7.0 pH and does not have the ability to calibrate it at 10.0, which is more in line with the range I need. I have two questions:

1) Will it really make a huge difference to the accuracy in the 7.8 - 8.2 range if it does not have a calibration point at 10.0?
2) If so, could I potentially use a 7.0 calibration solution for the 4.0 point and a 10.0 solution for the 7.0 point and simply take any reading and subtract 3? I know pH is logarithmic and not linear so I have no idea if this is a good idea or not.

Appreciate any input.
 
I purchased a used Reef Fanatics pH controller for a very low price off a local hobbyist recently, hoping I would be able to put it to use on my nano as a way to prevent accidental kalk overdoses. My issue is this pH controller was designed for calcium reactor use and therefore only has calibration points at 4.0 and 7.0 pH and does not have the ability to calibrate it at 10.0, which is more in line with the range I need. I have two questions:

1) Will it really make a huge difference to the accuracy in the 7.8 - 8.2 range if it does not have a calibration point at 10.0?
2) If so, could I potentially use a 7.0 calibration solution for the 4.0 point and a 10.0 solution for the 7.0 point and simply take any reading and subtract 3? I know pH is logarithmic and not linear so I have no idea if this is a good idea or not.

Appreciate any input.

It is OK to calibrate at pH 4 and 7 for use in seawater. I wouldn't do strange things like tricking the device about what the pH is. lol

I discuss such issues here:

https://reefs.com/magazine/aquarium-chemistry-measuring-ph-with-a-meter/
It is clear that with similar errors in the standard solutions, the errors in the measurements at pH 8-10 are smaller when calibrating at pH 7 and 10 than at pH 4 and 7. Whether these differences are important depend on the application and expectations of the aquarist.
 
I’ve calibrated my Pinpoint with 7.0 or 10.0 with no problem. I took a Fine Tip Paint Marker, and marked the direction to turn the Screws to increase the reading. After I’ve calibrated it, I use two different test kits, and zero it in on the tanks, actual pH. Afterwards I generally Calibrate it off the tanks pH, unless something seems seriously wrong. IE Time for a new probe. Don’t forget to clean the Probe with a Soft Toothbrush.
 
It is OK to calibrate at pH 4 and 7 for use in seawater. I wouldn't do strange things like tricking the device about what the pH is. lol

I discuss such issues here:

https://reefs.com/magazine/aquarium-chemistry-measuring-ph-with-a-meter/
It is clear that with similar errors in the standard solutions, the errors in the measurements at pH 8-10 are smaller when calibrating at pH 7 and 10 than at pH 4 and 7. Whether these differences are important depend on the application and expectations of the aquarist.

I appreciate the insight. The application is pretty basic, if pH goes above a set point, turn off the ATO pump. It's just a backup system in case of a stuck ATO sensor to prevent kalk overdoses. Sounds like I'm overthinking it as usual, I'll just roll with the 4 and 7.
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 8.3%
  • I decorate AROUND the tank or stand

    Votes: 1 8.3%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 9 75.0%
  • We don’t decorate for the holidays

    Votes: 1 8.3%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new