Phosphate rx?

reeferbuddy215

Active Member
View Badges
Joined
Jan 21, 2017
Messages
239
Reaction score
75
What state or country do you live in
Pennsylvania
Rating - 0%
0   0   0
Somebody gave me a new bottle of this phosphate remover that says 6 drops lowers phosphates 0.5 ppm for every 10 gallons and I've read this stuff works miracles. Now I have a dual reactor with gfo and a 40 gal refugium but my po4 is still 0.44 ppm and I'm nervous about trying this stuff but it claims to work in 24hrs. Any advice?
 
The stuff works great. What it does it uses lanthanum chloride link and the phosphates bond to lanthanum Chloride. You skim and filter it out. Pull the GFO when treating. Wait a couple of days, test and treat again. I you have all kinds of cyanobacteria the cyano will give you a reading lower then what it really is. If that is the case I would treat once, wait 4 day then use a cyano remover. Wait 4 more days and test again to see where you are at. If the Phosphates are still high but you do not need to cut them by half, then use a half dose.

After treatment run a small amount of GFO and you phosphated stay within a trace to .02. ;)
 
dang thanks but I'm nervous about dosing for the cyano I only have a couple spots of it it's almost gone but thanks for the advice.
 
I tested my po4 with my hanna which said 0.44 ppm so I tried dropping 10 drops of phosphate rx just to see if it does lower at all plus I wanna see how my livestock reacts, only difference is noticed was slightly cloudy water and my pulsing xenia shrunk slightly but I'm not worried about it and I'll test my po4 in 24hrs. Fingers crossed
 
Somebody gave me a new bottle of this phosphate remover that says 6 drops lowers phosphates 0.5 ppm for every 10 gallons and I've read this stuff works miracles. Now I have a dual reactor with gfo and a 40 gal refugium but my po4 is still 0.44 ppm and I'm nervous about trying this stuff but it claims to work in 24hrs. Any advice?
There are two nice YouTube videos that talk about it. In both cases, they are using 10 micron socks (not 100) to pull the bound phosphates out of the water. I'm not saying it's necessary, but I thought it was a cool approach to drip it directly into a 10 micron sock.

Top choice:
2nd choice:
 
Last night I dosed Phosphate RX at 3 drops per gallon! Everything this morning is fine...never mess with your tank when tired! I added 600 drops to a 200 gallon system, water was cloudy but clear 16 hours later. I find it hard to believe that this killed your fish. (I did drip it into a filter sock)
 
Last edited:

TOP 10 Trending Threads

WHEN PLANNING CORAL PLACEMENT, WHAT USUALLY WINS? THE FUTURE COLONY, OR THE NEXT FRAG?

  • I leave plenty of open space for large future colonies

    Votes: 3 21.4%
  • I plan for growth...but occasionally squeeze coral into tight spaces

    Votes: 5 35.7%
  • I try to balance future growth with variety now

    Votes: 4 28.6%
  • I fit in as many frags as I reasonably can

    Votes: 3 21.4%
  • One more frag always wins! Future me can solve the problem...

    Votes: 0 0.0%
  • It depends on the coral and how quickly it grows

    Votes: 1 7.1%
  • I squeeze 'em in! Survival of the fittest, baby!!

    Votes: 0 0.0%
  • I’m already out of room, so apparently we know my answer...

    Votes: 1 7.1%
Back
Top
Home
Post thread…
Market
What's new