Phosphates

christa1421

Community Member
View Badges
Joined
Oct 9, 2022
Messages
57
Reaction score
18
Location
Martinsville
What state or country do you live in
Indiana
Rating - 0%
0   0   0
How bad is it if phosphates are 0.00?? I have fish and coral in a 40g breeder with a 20g long sump that has chemi pure elite, phosguard (which I just removed because previously my phosphates were 0.06…removed it since they’ve bottomed out), Purigen, filter socks, skimmer, and refugium with chaeto. Set up in August, cycled since September. Here’s the rest of my parameters: 9.5 alk, 11.6 nitrates, 1.025 salinity, 463 calcium (yes, I know it’s a little high), 1390 mag, 8.3 pH. Not sure what I should do now. Any advice?? Should I remove the chemi pure elite? Should I dose phosphates?
 
0.06 is not high. 0.5 is high and needs gfo.
Chemipure elite and phosgard both have gfo, so remove.
Feed some reef roids to raise po4, no need to dose if you've removed gfo.
 
How bad is it if phosphates are 0.00?? I have fish and coral in a 40g breeder with a 20g long sump that has chemi pure elite, phosguard (which I just removed because previously my phosphates were 0.06…removed it since they’ve bottomed out), Purigen, filter socks, skimmer, and refugium with chaeto. Set up in August, cycled since September. Here’s the rest of my parameters: 9.5 alk, 11.6 nitrates, 1.025 salinity, 463 calcium (yes, I know it’s a little high), 1390 mag, 8.3 pH. Not sure what I should do now. Any advice?? Should I remove the chemi pure elite? Should I dose phosphates?

Well first thing I would suggest if you haven't already is repeat the test again and see if the numbers are the same. Get an idea first if that is a true result based on the test kit or an anomaly.

If it is indeed 0 then you need to increase it a bit. Few ways to do that before rushing to a product:

Remove anything you have that is absorbing it or removing it
Feed heavily a few days (fish will love you) and retest a couple days after

If your phosphates are still reporting 0 then you could find a simple product to dose if you need. I'd wager feeding heavy a few days both frozen and pellet will get you what you need.

Edit: not that it matters much but you really didn't say how old the display is or how stocked (coral and fish).
 
Well first thing I would suggest if you haven't already is repeat the test again and see if the numbers are the same. Get an idea first if that is a true result based on the test kit or an anomaly.

If it is indeed 0 then you need to increase it a bit. Few ways to do that before rushing to a product:

Remove anything you have that is absorbing it or removing it
Feed heavily a few days (fish will love you) and retest a couple days after

If your phosphates are still reporting 0 then you could find a simple product to dose if you need. I'd wager feeding heavy a few days both frozen and pellet will get you what you need.

Edit: not that it matters much but you really didn't say how old the display is or how stocked (coral and fish).
Thank you so much!! I’m still new and learning and appreciate the feedback. I removed the phosguard yesterday when the test read 0. Tested again today and it was still 0; so I just removed the chemi-pure elite. I’ll take your advice and feed a little heavy and retest in a few days. Thanks again
 

TOP 10 Trending Threads

HOW DO YOU HANDLE HOLIDAY DECORATING AROUND YOUR REEF?

  • I decorate the tank or stand

    Votes: 1 4.5%
  • I decorate AROUND the tank or stand

    Votes: 4 18.2%
  • I add one small seasonal touch but keep it very basic

    Votes: 0 0.0%
  • I take a holiday photo, but don’t decorate the space

    Votes: 0 0.0%
  • I leave the reef area as it is

    Votes: 13 59.1%
  • We don’t decorate for the holidays

    Votes: 4 18.2%
  • Other (Post in the comments)

    Votes: 0 0.0%
Back
Top
Home
Post thread…
Market
What's new