Mesdames et Messieurs
I started this pico/nano aquarium earlier this year, in Mars.
It was not easy because of multitude of DIY that I do.
I will briefly introduce you some of the stages of construction and than a little describtion of hardware.
So:
It came out as I wanted , without air bubbles and flawless:
I could not find white or black locline and, for the moment, I will go with this orange one .. It is sympa?
I removed 1 cm on each piece and finally adjusted to fit on overflow box (next step : bonding together)
Both tee and elbow processed:
And than the light:
Part I:
Drilling the heatsink (20x10cm)
Some leds on positions:
The final work with all leds mounted
It's working
The light with the LEDs color explanation:
Part II
Encrusted fan
View from the top with the fan and protection cover
from bottom:
Angle view:
I made myself a Zeovit reactor that meets following:
- debit:0-250lph to adjust the exact amount of water that flows in
- volume of zeovit stones: min 200ml
- small footprint: 7.5x7.5 cm (it will be placed in the retun room)
And a lot of work with:
And the final product
I started this pico/nano aquarium earlier this year, in Mars.
It was not easy because of multitude of DIY that I do.
I will briefly introduce you some of the stages of construction and than a little describtion of hardware.
So:
It came out as I wanted , without air bubbles and flawless:
I could not find white or black locline and, for the moment, I will go with this orange one .. It is sympa?
I removed 1 cm on each piece and finally adjusted to fit on overflow box (next step : bonding together)
Both tee and elbow processed:
And than the light:
Part I:
Drilling the heatsink (20x10cm)
Some leds on positions:
The final work with all leds mounted
It's working
The light with the LEDs color explanation:
Part II
Encrusted fan
View from the top with the fan and protection cover
from bottom:
Angle view:
I made myself a Zeovit reactor that meets following:
- debit:0-250lph to adjust the exact amount of water that flows in
- volume of zeovit stones: min 200ml
- small footprint: 7.5x7.5 cm (it will be placed in the retun room)
And a lot of work with:
And the final product