Please help!!!!! Alkalinity too high. What to do?!

JuliaRuss

New Member
View Badges
Joined
Mar 15, 2021
Messages
8
Reaction score
3
Location
cleveland
Rating - 0%
0   0   0
Hello, saltwater chemistry gurus:

I am having trouble with super high alkalinity:

-my water source: 4.5 dKH
-freshly made batch of saltwater, using instant ocean (regular): 13 dKH (already too high)

current problem: alkalinity too high. Can’t hold pH steady (keeps going lower). Calcium and magnesium keeps dropping.

Equipment: Fluval Evo 13.5 G. Cycled since January. Corals only.

salinity: 1.025
Temp: 76F
PH: 8.0 (I just added some baking soda)
NH3: 0
NO2: 0
NO3: 0
PO4: 0.25
Mg: 1020 (I just added some Mg supplement)
Ca: 325 (I just added some Ca supplement)
Kh: 15 (!!!!!!!!!!!)

My eventual goal is to add two clownfish, an anemone, and a small CUC.

Any insights will be super appreciated!!!! Thank you!
 

arking_mark

2500 Club Member
View Badges
Joined
Mar 2, 2016
Messages
2,603
Reaction score
1,820
Location
Potomac
Rating - 0%
0   0   0

Most problems can be mitigated with larger water changes and GAC

I recommend you do some large water changes with fresh ASW.
 

arking_mark

2500 Club Member
View Badges
Joined
Mar 2, 2016
Messages
2,603
Reaction score
1,820
Location
Potomac
Rating - 0%
0   0   0
Also, 13dKH is high for IO ASW. Most find it 11dKHish. I would suspect your observed measurements. What are you using to get your Alk measurements?
 

dedragon

5000 Club Member
View Badges
Joined
Feb 23, 2019
Messages
5,895
Reaction score
4,399
Rating - 0%
0   0   0
what source of water are you using? is it rodi water because it shouldnt have any alkalinity (i think)
 

arking_mark

2500 Club Member
View Badges
Joined
Mar 2, 2016
Messages
2,603
Reaction score
1,820
Location
Potomac
Rating - 0%
0   0   0
Also, with a smaller tank like the Fluval 13.5, I would go with larger water changes rather than dosing. Your measurements may be off and quality salt is rarely off.
 

dedragon

5000 Club Member
View Badges
Joined
Feb 23, 2019
Messages
5,895
Reaction score
4,399
Rating - 0%
0   0   0
are you using an adequate amount of aragonite sand in the tank or live rock? that usually helps with ph swings for me. If pH is dipping opening a window and also directing flow towards surface to help surface water agitation can help with o2 and ph problems.
 

Randy Holmes-Farley

Reef Chemist
View Badges
Joined
Sep 5, 2014
Messages
67,128
Reaction score
63,466
Location
Arlington, Massachusetts, United States
Rating - 0%
0   0   0
are you using an adequate amount of aragonite sand in the tank or live rock? that usually helps with ph swings for me. If pH is dipping opening a window and also directing flow towards surface to help surface water agitation can help with o2 and ph problems.

I do not think the aragonite is helping with pH swings, unless you are talking about well down into the 7's. It does not dissolve at any pH above 7.8 in seawater.
 

Randy Holmes-Farley

Reef Chemist
View Badges
Joined
Sep 5, 2014
Messages
67,128
Reaction score
63,466
Location
Arlington, Massachusetts, United States
Rating - 0%
0   0   0
-my water source: 4.5 dKH

As folks noted, that may be the issue.

What is that water?

You add it to make new salt water and for top off?

There is 0 alkalinity in pure water.
 
Back
Top