I am getting ready to glue everything together...figured I'd make sure no one sees issues.
Some details:
Return pump is Reef Octo varios 10, which routes through a UV light, into a sea swirl. This is the sole item that is on the return. I ahve strategicly placed a couple of unions, and made a replacement section incase I need to pull the uv off-line.
It has a manifold, that runs with a reef octo varios6. It has the potential to run 5 item, but will only be running 3: gfo/carbon reactors that are in line, alge scrubber and to feed an ozone reactor.
3 drains total: 2 that were 1.5" reduced to 1" that drain into the sump. The 3rd is for emergency drain and left at 1.5" to ensure that it will always out compete the drains should they both get clogged.
Please keep in mind, nothing is glued and all the white pipes will be swapped out with blue and cleaned up, as they will of course press in more with glue. You might see some couplings, those will be gone as well....they were used just to add the length i need.
Do I need to address anything...?
Some details:
Return pump is Reef Octo varios 10, which routes through a UV light, into a sea swirl. This is the sole item that is on the return. I ahve strategicly placed a couple of unions, and made a replacement section incase I need to pull the uv off-line.
It has a manifold, that runs with a reef octo varios6. It has the potential to run 5 item, but will only be running 3: gfo/carbon reactors that are in line, alge scrubber and to feed an ozone reactor.
3 drains total: 2 that were 1.5" reduced to 1" that drain into the sump. The 3rd is for emergency drain and left at 1.5" to ensure that it will always out compete the drains should they both get clogged.
Please keep in mind, nothing is glued and all the white pipes will be swapped out with blue and cleaned up, as they will of course press in more with glue. You might see some couplings, those will be gone as well....they were used just to add the length i need.
Do I need to address anything...?
