Powerbar question

[DJF]

Is there a way to set up switches on the powerbar so that they will stay on if they lose connectivity with the p4? Something like always on but still responds to feed pauses/mtce.

 

[ingchr1]

Yes, you can set the initial states. If the boxes are checked the outlet will turn on if connectivity is lost to the P4. If connectivity is lost they will not respond to any commands initiated from the P4.

Here is what it looks like on GCC.

 

[DJF]

Perfect, Thanks.

 

[Lasse]

Something like always on but still responds to feed pauses/mtce

They will be on with the configuration in post 2 - but because the power bar is not in contact with the P4 (where the feed and maintenance is programmed) it will not answer feed and maintenance commands. But directly after the connection is up again - it will be as normal.

Sincerely Lasse