Pump layout questions

[Bryce M.]

Not too sure if this should be in equipment or not so feel free to move. Anyways, so I've been pretty disappointed with my flow, now that I made a sketch showing the flow I can easily see why. The red circle is a standard wave pump that wasn't in when this photo was taken.

It's rough but shows my issue here. The reefwave flow was taken from their diagrams, of course all of these streams minus the two middle returns are on various wave intervals, I run random with highest being max. My first thought is definitely moving that regular pump that's pointing up, also should I move the reefwaves? I feel like the left side is doing nothing.
I'm also considering getting another gyro pump.

I was thinking of one maybe two doing the configuration of figure 3 but angled to flow into the middle. Figure 4 shows going into the middle but my current pumps are in the way.

I'm highly considering setting the two I have now up in the configuration of figure 4.
Any advice?

 

[The_Paradox]

Figure 3 is closest to the starting point I use. You really have to see what works in your tank though as rock work plays a big role in current. Bouncing off the glass has a big effect so don’t right that off.

 

[Bryce M.]

Figure 3 is closest to the starting point I use. You really have to see what works in your tank though as rock work plays a big role in current. Bouncing off the glass has a big effect so don’t right that off.

Thank you! I'm going to play around with the config on figure three tonight. My tank being longer than the cube shown I might have to move the a little closer to the middle. Though I absolutely will try it close to the glass and try bouncing, seems like that might be a key aspect I'm missing.