Question about chaeto/refugium

  • Thread starter Thread starter Pivitol
  • Start date Start date
  • Tagged users Tagged users None

Pivitol

Active Member
View Badges
Joined
May 3, 2017
Messages
495
Reaction score
707
Location
NOCO
What state or country do you live in
Colorado
Rating - 0%
0   0   0
So I am about to do a reboot of sorts. Currently I have a 200gal display w/a 40gal sump, the sump is too small to put all the crap I want/"need" into so the wife gave me permission to move it to a wall that I can plumb through and have a "sump room". So I am going all in, I purchased a 100gal Rubbermaid stock tank for the sump and am looking for ideas for a separate refugium. I have read that for a refugium with chaeto you want a taller refugium so it can tumble does this help or is it internet lore? The current tank/refugium I am looking at is https://www.tractorsupply.com/tsc/p...eavy-duty-oval-stock-tank-40-gal?cm_vc=-10005 but at only 13" tall is it tall enough if it needs to tumble. (Might make a great frag tank though) Second what would be the desired flow through on a 40gal fuge? I plan on putting it directly over the sump feeding it via it's own pump or from a manifold and gravity drain back to the sump.
 
So I am about to do a reboot of sorts. Currently I have a 200gal display w/a 40gal sump, the sump is too small to put all the crap I want/"need" into so the wife gave me permission to move it to a wall that I can plumb through and have a "sump room". So I am going all in, I purchased a 100gal Rubbermaid stock tank for the sump and am looking for ideas for a separate refugium. I have read that for a refugium with chaeto you want a taller refugium so it can tumble does this help or is it internet lore? The current tank/refugium I am looking at is https://www.tractorsupply.com/tsc/p...eavy-duty-oval-stock-tank-40-gal?cm_vc=-10005 but at only 13" tall is it tall enough if it needs to tumble. (Might make a great frag tank though) Second what would be the desired flow through on a 40gal fuge? I plan on putting it directly over the sump feeding it via it's own pump or from a manifold and gravity drain back to the sump.
While chaeto tumbling is a good thing to ensure all sides are getting light, it hardly ever happens. Most often the reefer will flip his chaeto every once and a while. But very few do but still have great success. As far as flow anywhere from 5 to 10x turn over of the display tank to me seems like a good starting point. Do you have your lighting all sorted out yet?
 
I try to tumble chaeto after like a weeks growth the ball is too big and the power head collects little pieces of chaeto. If your going to tumble put a porous barrier between the tumbling powerhead and the algae. Otherwise all your gaining is more maintenance to do, ime anyway.
 
I currently have an unused 2bulb t5 36" fixture and would use a 6500k and red spectrum bulb. At least that's the plan for now.
 
I try to tumble chaeto after like a weeks growth the ball is too big and the power head collects little pieces of chaeto. If your going to tumble put a porous barrier between the tumbling powerhead and the algae. Otherwise all your gaining is more maintenance to do, ime anyway.
I originally was thinking of using eggcrate around the overflow area and could make "cages" for the powerheads. Do you think that would work?
 
I used a net breeder box as my cage, already have them for freshwater fish breeding.
If your holes end up being to big easy to close up a bit with some fishing line.
 
Just dont use block sponges, even course ones just add a place to clean detritus out of.
 
I originally was thinking of using eggcrate around the overflow area and could make "cages" for the powerheads. Do you think that would work?

I was contemplating the same thing recently when adding a fuge. In my case, my fuge is a 20G Brute barrel with the pump feeding it in the sump. I have tried the powerhead route before to get cheato tumbling (they always clog), so this time I plumped the feed line through the side of the barrel and to the bottom, pointed up. This way the cheato tumbles with no local pump/PH to clog. Works great.

Dennis
 
Bulk Reef Supply had a series of videos on chaeto. They are well worth watching.

I set up chaeto in my sump refugium. At first, it did great with a Home Depot LED. It never tumbled. I just turned it daily.

Then I ramped up my display tank lights and the chaeto withered.

So I got a kessel refugium light and it flourished again.

Then it died. Turned out that I had 0 phosphate.

So I dosed phosphate to keep it measurable and the chaeto flourished again.

Chaeto is good for nutrient export and supposedly releases organic into the water which are good for corals.
 
I built an box out of egg crate and placed it in my sump. Spent about $15 and it's working great. I use the Kessil 380 and it's amazing.
 

TOP 10 Trending Threads

WHAT DO YOU ALWAYS RUN OUT OF AT THE WORST TIME?

  • Salt mix

    Votes: 14 17.5%
  • Fish or coral food

    Votes: 5 6.3%
  • Test kits or reagents

    Votes: 8 10.0%
  • Filter media or replacement fleece

    Votes: 4 5.0%
  • RO/DI filters or supplies

    Votes: 13 16.3%
  • Fragging and repair supplies, like glue or epoxy

    Votes: 9 11.3%
  • I keep a backup of everything

    Votes: 21 26.3%
  • Other (Post in the comments)

    Votes: 6 7.5%

New Posts

Back
Top
Home
Post thread…
Market
What's new